Safety package manual

9 Liter oil suction pump. Liquid suction pump, hand pump and transfer pump. Used to extract any kind of fluid, quite popular among automotive maintenance application to remove oily substances from engine and tight spaces. This is a manual type, suction is generated by the movement of the handle. This pump is suitable for liquids, e.g. Oil, gear oil, engine oil, brake fluid, water, etc. With this hand pump you can: – suck and decant the water – make a water change, for example in an aquarium – refill the fuel for e.g. lawn mower or motorcycles, etc. Thanks to the polyethylene construction, this pump is also suitable for the industry because it is resistant to corrosion. The manual liquid extractor can be used to extract many types of non-explosive liquids. New safety design: when the container is filled with liquid, the mechanism is automatically switched off. Quick, clean and easy to use. No electric sparks, safe for the workshop. Perfect remedy in the house, garden, workshop, industry or agriculture. Technical specifications: High capacity (9 liters) With automatic securing against overfilling With over pressure safety valve for more safety Including 3 different adapter tubes Incl. all required hoses Height: 61 cm Width: 32 cm Weight: 3,6 kg Length of each hose: 113cm Outer Diameter of each adapter tube: 6mm / 8mm / 10mm Maximum temperature 100°C Working pressure: 70-170 PSI SKU: 15332 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

Good condition. Parts and manual included. Not suitable for full suspension bikes.

Get your manualling dialled! I built this frame to last me for many years, great to practice my manuals on those rainy days. Unfortunately we are now relocating and have to trim the fat, therefore it needs a new home. Frame accommodates MTB tyres 650b and 29er up to 2.5" width. Built in safety strap to prevent flipping out. This is priced to go and due to the size of it I can only consider local collection. Please contact me via Whatsapp or SMS for best response. Dimensions available on request.

When the size of a boat increases, so does inevitably the size and weight of the anchor becomes bigger, which apparently cannot be weighted by hand. This is where an anchor windlass takes over. The reasons you should acquire an anchor windlass on our boat is Safety and Utility. A windlass allows you to handle different anchoring situations – even the most critical – always in absolute safety. With a windlass, every anchoring maneuver becomes extremely simple and remains under your control. No more fear of failing to retrieve your anchor. – White polyester coating – Manual chain release – Rope chain management by the spring load arm – Chain counter magnet pre-setting as standard – Heavy duty rated IP66 electric motor – Control Box included in package Specs: Description: WINDLASS H. LION 1000 ALU 700W/12V 8-5/16?BBB-5/16?HT Motor: 700W / 12V Type: Low Profile Automatic Free Fall: No Gipsy For Chain: 8mm, ISO 4565 / DIN 766 Gipsy For Rope: 12 mm, 3-strand Line Speed at Working Load (m/min): 23 m/min Max Line Speed: 26 m/min Maximum Pull: 575 kg Net Weight: 11kg Power Supply: 12 V Working load (kg): 105 Amps Work Load (A): 60 636215 Items Available: 5 Stock ID: SKU: 20013 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. FRONT MOUNT HYDRAULIC HELM PUMP: * Part No: LM-HP-27 Features: * Number of turns is 6.1 * Vol. 27CC * Built in lock valve * Pressure relief feature * 3/4” tapered shaft to suit all marine steering wheels * Corrosion proof * Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is usually fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: * Number of turns is 6.1 * Vol. 166CC * Stroke 203mm * Front mount cylinder * Made from Aluminium Tube – Hard Anodized * Light weight * Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. FRONT MOUNT HYDRAULIC HELM PUMP: * Part No: LM-HP-27 Features: * Number of turns is 6.1 * Vol. 27CC * Built in lock valve * Pressure relief feature * 3/4” tapered shaft to suit all marine steering wheels * Corrosion proof * Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is usually fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: * Number of turns is 6.1 * Vol. 166CC * Stroke 203mm * Front mount cylinder * Made from Aluminium Tube – Hard Anodized * Light weight * Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. FRONT MOUNT HYDRAULIC HELM PUMP: * Part No: LM-HP-27 Features: * Number of turns is 6.1 * Vol. 27CC * Built in lock valve * Pressure relief feature * 3/4” tapered shaft to suit all marine steering wheels * Corrosion proof * Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is usually fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: * Number of turns is 6.1 * Vol. 166CC * Stroke 203mm * Front mount cylinder * Made from Aluminium Tube – Hard Anodized * Light weight * Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 For more information on this Product: Contact Etienne on 073 409 4629 (Or Whats App)

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. POHS 250AF FRONT MOUNT HYDRAULIC HELM PUMP: Part No: LM-HP-27 Features: – Number of turns is 6.1 – Vol. 27CC – Built in lock valve – Pressure relief feature – 3/4” tapered shaft to suit all marine steering wheels – Corrosion proof – Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: – Number of turns is 6.1 – Vol. 166CC – Stroke 203mm – Front mount cylinder – Made from Aluminium Tube – Hard Anodized – Light weight – Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. Items Available: 2 Stock ID: SKU: 15904 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. *D* POHS 250AF FRONT MOUNT HYDRAULIC HELM PUMP: Part No: LM-HP-27 Features: – Number of turns is 6.1 – Vol. 27CC – Built in lock valve – Pressure relief feature – 3/4” tapered shaft to suit all marine steering wheels – Corrosion proof – Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: – Number of turns is 6.1 – Vol. 166CC – Stroke 203mm – Front mount cylinder – Made from Aluminium Tube – Hard Anodized – Light weight – Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. *D* POHS 250AF FRONT MOUNT HYDRAULIC HELM PUMP: Part No: LM-HP-27 Features: – Number of turns is 6.1 – Vol. 27CC – Built in lock valve – Pressure relief feature – 3/4” tapered shaft to suit all marine steering wheels – Corrosion proof – Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: – Number of turns is 6.1 – Vol. 166CC – Stroke 203mm – Front mount cylinder – Made from Aluminium Tube – Hard Anodized – Light weight – Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 Contact: Email: bsapotchefstroom@gmail.com

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. FRONT MOUNT HYDRAULIC HELM PUMP: * Part No: LM-HP-27 Features: * Number of turns is 6.1 * Vol. 27CC * Built in lock valve * Pressure relief feature * 3/4” tapered shaft to suit all marine steering wheels * Corrosion proof * Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is usually fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: * Number of turns is 6.1 * Vol. 166CC * Stroke 203mm * Front mount cylinder * Made from Aluminium Tube – Hard Anodized * Light weight * Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. SKU: 15904 Contact HERMAN on 061 935 3537 or email: bsajohannesburg@gmail.com

This hydraulic steering system will reduce the steering effort due to the fact that Multiflex steering provides more output power resulting in lower steering effort. Multiflex Hydraulic Steering offers a safe easy drive in any sea conditions. *D* POHS 250AF FRONT MOUNT HYDRAULIC HELM PUMP: Part No: LM-HP-27 Features: – Number of turns is 6.1 – Vol. 27CC – Built in lock valve – Pressure relief feature – 3/4” tapered shaft to suit all marine steering wheels – Corrosion proof – Includes ORB fittings Function: A helm pump is an Axial Piston Manual pump. The function of the helm pump is to push oil in the hydraulic circuit when the steering wheel mounted on the pump shaft is rotated. The helm pump is fitted with a lock valve to prevent the rudder feedback to the steering wheel. Also for safety, the pump is fitted with a relief valve. FRONT MOUNT ALUMINIUM HYDRAULIC CYLINDER: Part No: LM-OC-350AF Features: – Number of turns is 6.1 – Vol. 166CC – Stroke 203mm – Front mount cylinder – Made from Aluminium Tube – Hard Anodized – Light weight – Corrosion Resistant Function: The cylinder is the devise which provides the movement of the engine or the rudder depending on application. This movement effectively steers the boat. The selection of the cylinder is very critical to the performance of the hydraulic steering system and should be done very carefully. HYDRAULIC OIL: Part No: LM-HO-150 Hydraulic Oil – 2 x 1 Litre HOUSE KIT AND END FITTINGS: Part No: LM-RT-7.5 2 x Hoses of 7.5m each (with pre-assembled fittings) OIL FILLING KIT: Part No: LM-OF-01 FITTINGS: 1/2”-20 UNF -9/16”-20UNEF The Steering Wheel is not included in Package Outboard Steering System and can be purchased separately. Items Available: 3 Stock ID: SKU: 15904 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com

SPECIFICATIONS Name L508 Radar Tail Light Dimensions 8*94*25mm Weight 65g Maximum detection distance 140m Horizontal detection angle 40° Vertical detection angle -10°- +10° Relative speed of detectable targets 10-120km/h Charging port Type-C Wireless protocol Bluetooth, ANT+ Modes 5 kinds (solid mode, flashing mode, pulse mode, peloton mode, and only radar mode) Battery life 6h in solid mode; 10h in flashing mode; 8h in peloton mode; 12h in pulse mode; 3 months in standby mode (affected by the environment and temperature) Luminous flux: 20 lm (solid mode); 20 lm (flashing mode); 6 lm (peloton mode); 3-20 lm (pulse mode) Smart brake sensing Yes Auto-sleep/auto-wake Yes Viewing angle 220° Waterproof grade IPX7 Package includes L508 radar tail light *1, rubber straps *3, seat post bracket (with pad) *1, manual *1, Type-C power cable *1, safety strap *1. Compatible bike computers Magene: C406 Pro Garmin: 130, 130P, 520, 520P, 530, 820, 830, 1000, 1030, 1030P Wahoo: Bolt, Roam Byron: R750, S500 Compatible watches Garmin: 245, 645, 735, 745, 935, 945, D2, Fenix 5, 5s, 5x, 5Plus, 5xPlus, 6s, 6x, 6Pro, 6sPro, 6xPro Compatible APP Magene Utility APP

Cleaning out some stuff and found a bunch of my wrist watches I'm not wearing anymore... Jacques Lemans UEFA U-32I (Champions League Edition - Rare): Condition: Pristine. Packaging: Original box and pillow. Price: R2500 Police 11310JS-04: Condition: Pristine. Packaging: Original Box (Box is a bit worn). Price:R1200 Police 10891BS/02: Condition: Pristine. Packaging: None (Will package securely if shipping is required). Price: R1000 Festina F16235/2: Condition: Pristine. Packaging: Original Box and pillow with Owner's Manual. Price: R1000 Guess U12515G1: Condition: Excellent. Packaging: Original Box and pillow. Price: R1200 Swatch Irony Diaphane Chrono (Orange Strap): Condition: Good, a few light scuffs on top right of face, strap also a bit worn. Packaging: None (Will package securely if shipping is required). Price: R500 Caterpillar (CAT): Condition: Pristine. Packaging: None (Will package securely if shipping is required). Price: R500.00 La Montré Vivre: Condition: Excellent. Packaging: None (Will package securely if shipping is required). Price: R400

Cleaning out some stuff and found a bunch of my wrist watches I'm not wearing anymore, watches need new batteries, I'll get the battery replaced for the watch you want before selling it. Jacques Lemans UEFA U-32I (Champions League Edition - Rare): Condition: Pristine. Packaging: Original box and pillow. Price: R2500 Police 11310JS-04 (Orange): Condition: Pristine. Packaging: Original Box (Box is a bit worn). Price:R1200 Police 10891BS/02 (Square Black): Condition: Pristine watch, but strap needs replacing. Packaging: None (Will package securely if shipping is required). Price: R500 Festina F16235/2: Condition: Pristine. Packaging: Original Box and pillow with Owner's Manual. Price: R1000 Guess U12515G1: Condition: Excellent. Packaging: Original Box and pillow. Price: R1200 Swatch Irony Diaphane Chrono (Orange Strap): Condition: Good, a few light scuffs on top right of face, strap also a bit worn. Packaging: None (Will package securely if shipping is required). Price: R500 Caterpillar (CAT): Condition: Pristine. Packaging: None (Will package securely if shipping is required). Price: R500.00 La Montré Vivre: Condition: Excellent. Packaging: None (Will package securely if shipping is required). Price: R400