Project g

Biva holdings PTY LTD mining and constructional machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva holdings you become a heavy machine operator, e.g: excavator, dump truck,tlb, grader and LHD scoop. Biva holdings we welcome all people both male and female from 18 years old and above qualify for the training no matter your qualification/ grade and in good condition. We offer our students the best training. Biva holding project operators training centre registration no is: 2012/078 202/07 Biva holdings project is an accredited training institute in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulatory 11 and institute of material handling code of practice SA1HOOL-1992- REG NO 2012/078202/07, we are situated in 89 hundson street Germiston 1401 and we offer all our students free accommodation and free job assistance after the training, For more information please call: 011 075 4138/ 078 776 8982

Biva Holdings PTY LTD mining and construction machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva Holdings you can become a heavy machine operator e,g: excavator, tlb, grader, dump truck, front-end loader and LHD scoop. Biva Holdings PTY LTD we welcome all people both male and female who are 18 years old and above gualify for the training no matter your qualification/ grade and in good condition. Biva Holdings project we offer all our students the best training. Our registration no is: 2012/078202/07 Biva Holdings project is accredited training centre in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulations 11 and institute of materials handling code of practice" SA1H00L-1992-REG NO:2012/078202/07 FOR MORE INFORMATION CALL: 011 075 4138/ 078 776 8982

Biva holdings PTY LTD mining and constructional machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva holdings you become a heavy machine operator, e.g: excavator, dump truck,tlb, grader and LHD scoop. Biva holdings we welcome all people both male and female from 18 years old and above qualify for the training no matter your qualification/ grade and in good condition. We offer our students the best training. Biva holding project operators training centre registration no is: 2012/078 202/07 Biva holdings project is an accredited training institute in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulatory 11 and institute of material handling code of practice SA1HOOL-1992- REG NO 2012/078202/07

Biva holdings PTY LTD mining and constructional machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva holdings you become a heavy machine operator, e.g: excavator, dump truck,tlb, grader and LHD scoop. Biva holdings we welcome all people both male and female from 18 years old and above qualify for the training no matter your qualification/ grade and in good condition. We offer our students the best training. Biva holding project operators training centre registration no is: 2012/078 202/07 Biva holdings project is an accredited training institute in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulatory 11 and institute of material handling code of practice SA1HOOL-1992- REG NO 2012/078202/07.

Biva holdings PTY LTD mining and constructional machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva holdings you become a heavy machine operator, e.g: excavator, dump truck,tlb, grader and LHD scoop. Biva holdings we welcome all people both male and female from 18 years old and above qualify for the training no matter your qualification/ grade and in good condition. We offer our students the best training. Biva holding project operators training centre registration no is: 2012/078 202/07 Biva holdings project is an accredited training institute in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulatory 11 and institute of material handling code of practice SA1HOOL-1992- REG NO 2012/078202/07 For more information please call: 011 075 4138/ 078 776 8982

Biva holdings PTY LTD mining and constructional machinery training with professional assessors to make sure you learn all the basics and the safety precautions of theory and practicals U tried them all, now try the best!!!! For all welding courses like: co2 welding, stick welding, argon welding and boiler making. From Biva holdings you become a heavy machine operator, e.g: excavator, dump truck,tlb, grader and LHD scoop. Biva holdings we welcome all people both male and female from 18 years old and above qualify for the training no matter your qualification/ grade and in good condition. We offer our students the best training. Biva holding project operators training centre registration no is: 2012/078 202/07 Biva holdings project is an accredited training institute in accordance with the occupational health and safety act 85-1992 driven machinery regulatory 18 sub regulatory 11 and institute of material handling code of practice SA1HOOL-1992- REG NO 2012/078202/07 For more information please call: 011 075 4138/ 078 776 8982, we offer free accommodation and free job assistance to all our students

As an Electrical Project Engineer, you will be responsible for the planning, coordination, and execution of electrical projects. You will ensure that electrical systems are designed, installed, and commissioned according to client requirements, on time, and within budget. The role involves working closely with multidisciplinary teams, managing project documentation, and ensuring compliance with safety regulations and industry standards. Key Responsibilities: Lead and manage electrical engineering projects from inception to completion, ensuring that all project requirements are met. Design electrical systems, including power distribution, lighting, and control systems, in compliance with codes and standards. Prepare and review project specifications, drawings, and documentation. Oversee the procurement and logistics of electrical materials and equipment, ensuring quality and cost-efficiency. Manage project schedules and budgets, tracking progress and providing regular updates to stakeholders. Collaborate with project teams, including Mechanical, Civil, and Safety Engineers, to ensure seamless project execution. Supervise on-site activities, ensuring proper installation, commissioning, and testing of electrical systems. Identify and resolve technical issues, ensuring compliance with safety and regulatory standards. Conduct risk assessments and ensure adherence to health, safety, and environmental guidelines. Maintain accurate project records, including drawings, reports, and certifications. Provide technical support and guidance to Junior Engineers and project teams. Key Requirements: Bachelor's Degree in Electrical Engineering or a related field. Proven experience as an Electrical Project Engineer, with a focus on electrical system design and project management. Strong understanding of electrical codes, standards, and regulations (e.g., NEC, IEC, BS). Experience with electrical design software (e.g., AutoCAD, ETAP, Revit). Solid project management skills, including budgeting, scheduling, and resource management. Ability to interpret technical drawings, specifications, and electrical codes. Excellent communication and problem-solving skills to collaborate with teams and clients. Experience with electrical commissioning, testing, and troubleshooting. Strong organizational skills with the ability to manage multiple projects simultaneously. A proactive, detail-oriented, and results-driven approach to work. This position is located in Nelspruit.

As an Electrical Systems Engineer, you will be responsible for the design, development, and optimization of electrical systems across a variety of projects. You will ensure that all electrical systems operate efficiently, safely, and in compliance with relevant regulations and codes. You will be working closely with project teams, contractors, and clients to deliver exceptional electrical solutions. Key Responsibilities: Design, develop, and test electrical systems for complex projects, including power distribution, lighting, control systems, and safety systems. Conduct system analysis and simulations to ensure electrical systems are efficient, reliable, and meet project requirements. Review and create electrical system specifications, ensuring compliance with local and international standards (e.g., NEC, IEC). Collaborate with multidisciplinary teams, including mechanical, civil, and project management engineers, to ensure seamless integration of electrical systems. Provide technical support and guidance to the project team, contractors, and clients during the installation, commissioning, and operation of electrical systems. Perform fault analysis, troubleshooting, and optimization of existing electrical systems. Participate in the preparation of project budgets, timelines, and technical documentation. Ensure all electrical designs comply with safety regulations, industry standards, and best practices. Prepare and deliver technical reports, presentations, and recommendations to stakeholders. Qualifications: Bachelors degree in Electrical Engineering or a related field. Experience in electrical systems engineering. Strong understanding of electrical system design, including power distribution, control, and automation systems. Proficiency in electrical design software (e.g., AutoCAD, ETAP, PowerCAD, etc.). In-depth knowledge of electrical codes, standards, and regulations. Excellent analytical and problem-solving skills. Strong communication skills, both written and verbal. Ability to manage multiple projects simultaneously and meet deadlines.

A global leader in testing, inspection, and certification (TIC) services is seeking an experienced Solar Project Coordinator to support the construction of a large-scale solar PV power plant in Polokwane, Limpopo. Duration of Contract: 6 months Requirements: 3+ years of project administration experience in construction, energy, or infrastructure project Strong administrative, coordination, and problem-solving skills Stakeholder engagement across multi-disciplinary teams, contractors, and consultants Proficiency in project scheduling tools (e.g., MS Project, Primavera, or similar) (Advantageous) Key Responsibilities: Project Coordination & Administration: Support daily operations, ensuring seamless execution of project tasks Documentation & Compliance: Maintain project records, contracts, and regulatory documentation Scheduling & Procurement: Manage project schedules, equipment procurement, and materials tracking Stakeholder Coordination: Work closely with engineers, consultants, and EPC teams to monitor project progress Performance Monitoring & Reporting: Track project milestones, risks, and deliverables while ensuring compliance with contractual obligations Safety & Regulatory Compliance: Ensure all activities adhere to local and international safety and environmental regulations.

We are currently seeking a qualified and experienced Electrical Engineer (Heavy Current) to join our dynamic team. Key Responsibilities: Design and Development: Create electrical system designs, layouts, and plans for heavy current systems including power distribution, motor control, and protection systems. Project Management: Oversee electrical engineering projects from conception to completion, ensuring adherence to timelines, budgets, and client requirements. Troubleshooting and Maintenance: Provide support in troubleshooting and resolving electrical issues related to heavy current systems. Conduct regular maintenance checks on systems to ensure optimum performance. Compliance and Standards: Ensure all electrical designs, installations, and operations comply with industry standards, regulations, and company safety protocols. Team Collaboration: Work closely with other engineering teams, contractors, and clients to ensure efficient project execution. Documentation and Reporting: Prepare detailed technical reports, designs, and documentation for project progress and compliance records. Qualifications and Requirements: Education: BEng/BSc in Electrical Engineering (Heavy Current) Experience: Experience in heavy current electrical engineering, with a focus on [specific industries, e.g., power generation, industrial automation, etc.]. Technical Skills: Proficiency in electrical design software (e.g., AutoCAD, ETAP, etc.), electrical schematics, power distribution systems, and motor control systems. Knowledge: Strong understanding of electrical codes, standards, and safety regulations. Problem-Solving: Excellent analytical and problem-solving skills to address complex electrical issues. Communication: Strong written and verbal communication skills. Teamwork: Ability to work independently and as part of a team in a fast-paced environment.

RESPONSIBILITIES: · General Resolve user and client issues within SLA. Offer remote and potentially onsite support. Install and configure hardware and software components. Assist with user acceptance testing. Troubleshoot hardware and software issues. Perform root cause analysis. Repair or replace damaged hardware. Perform tests and evaluations of new software and hardware. Provide advanced user support and training. Pro-active communication to stakeholders. Conduct daily system checks and maintenance operations. Establish good relationships with all customers and colleagues. Manage technical documentation work with 3rd party vendors for system support. Technical Project Management. · Server Administration (Windows and/or Linux): Server administration and maintenance. User and Group administration. Backup administration. Network Administration: IP and Routing design administration. Security. Deployment of networks. Switch, Wi-Fi, Router and Firewall administration. DNS administration. Network traffic monitoring and troubleshooting. EDUCATION AND EXPERIENCE (minimum): SKILLS / EXPERIENCE / COMPETENCIES & TECHNOLOGIES: · Software: o Windows environment software § Microsoft Windows (desktop), Microsoft Server & Microsoft Office Suite § Anti-Virus Software (ESET) § Backup technologies (Altaro, Arc Server, Tape drives) § Infrastructure Monitoring (e.g. PRTG, Nagios, Solarwinds, etc.) § VM (e.g. HyperV, VMWare) o Linux environment software § Linux OS § DNS (Bind) § Mail (e.g. Postfix, Sendmail, Exim, etc.) § Fileserver (e.g. SMB, NFS, iSCSI, etc.) § VM (Proxmox) · Networking: o Midlevel knowledge of routing, switching, IP addressing & FW rules o Analysis/Troubleshooting software (e.g. Wireshark) o Cabling and Crimping o Network equipment experience (e.g. Ubiquity, Mikrotik, Cisco, Dell, Sonicwall, Fortigate, Huawei) · Other: o Python, PowerShell and other scripting skills o Proven telephonic and onsite support history. o Any additional software and database skills would be advantageous. o Experience in telecommunication/transmission systems including Wifi, LTE, 5G, VoIP, etc. would be advantageous. Experience in fiber optics would be advantageous.

We are currently looking for a OSP Planning Specialist to be based in the Eastern Cape. * Fibre Planning * Identify infrastructure and network expansion requirements as input to network capacity and performance planning, optimization and upgrading of infrastructure. * Design, recommend and vet core network and customer solutions expert knowledge and in line with technology standards. * Design solutions for Core and Services which is in line with technology standards so as to build a robust an efficient network. * Implantation of Project Management Methodology and Fundamentals of Project Management * Fully responsible for orders and planning within the  region however also complete orders/projects within other regions in order to maintain the target of 200 orders monthly.  * Ensure Contractors adhered to the LT rates, contracts and policies.  * Ensure all projects are planned to the best practical option and planning principals.  * Ensure contractor planners are fully trained and understand new planning principals such as LME strategies and Drop cable methodology.  * Training of junior staff and interns. * Schedule and attend site surveys if there are any difficulties in order to complete a survey or where I expect that the best practical option was not considered. * Measuring of Contractors Performance by means of reports and statistics. * Act as adviser between Contractor planners and Neotel Junior planners in order to improve quality and provide accurate planning’s.  * Participate in major RFP’s and DWDM solutions with strict timelines.  * Update OSP fibre records on GE  * Participate in major RFP’s and DWDM solutions with strict timelines.  * Update OSP fibre records on GE  * Contribute in aligning the records with what is out in the field in order to maintain accurate records. * Coordinating of activities pertaining to technology and business unit projects  * Quality assurance and overall integrity of project  * Grade 12 with a technical tertiary qualification (e.g. BSC, BTECH/National * Diploma Eng. etc.). * Experience in the telecommunications industry where incumbent was responsible for: * Fibre Network Planning and Surveys * Managing outside plant rollout * Relationship management experience and dealing with customers at all levels * Excellent skills in Micro Soft Office Tools and Techniques with emphasis on MS Projects and MS Excel * Good knowledge in all planning tools such as GE * Smallworld and Velocity * Good understanding of technology, products and services offered by LT and the telecommunications industry  * Experience in dealing with cross-functional work groups * Project Management Essential * The ability to command respect and to create a sense of communication amongst members of the project teams  * Good knowledge of techniques for planning, monitor and controlling programmes * Good knowledge of project management approaches * The ability to find ways

Key Responsibilities: Design, develop, and maintain electrical systems, ensuring compliance with industry standards and regulations. Perform system analysis, simulations, and testing to ensure system performance and reliability. Collaborate with multidisciplinary teams to integrate electrical systems with other components and technologies. Provide technical expertise and support for electrical system design, troubleshooting, and optimization. Develop and review technical documentation, including schematics, manuals, and specifications. Lead and participate in system installations, commissioning, and performance evaluations. Troubleshoot and resolve electrical system issues, offering solutions to ensure minimal downtime and maximum efficiency. Participate in project planning and risk management, ensuring deadlines and budget constraints are met. Stay up-to-date with emerging technologies and industry trends to continuously improve system performance. Requirements: Bachelor's degree in Electrical Engineering or a related field. Proven experience in electrical system design, testing, and optimization (3+ years preferred). Strong knowledge of electrical engineering principles, standards, and regulations (e.g., IEC, NEC). Proficient in electrical simulation and design software (e.g., AutoCAD, MATLAB, ETAP). Excellent problem-solving, analytical, and troubleshooting skills. Strong communication and teamwork abilities. Ability to work under pressure and manage multiple tasks and priorities effectively. Familiarity with project management processes and tools is a plus. Experience in [industry-specific knowledge] is highly desirable.

A company in the steel industry is looking for a Welding inspector to join their team in Rustenburg Must have experience in the following: Welding Inspection: Perform visual and non-destructive testing (NDT) to inspect welds and ensure compliance with project specifications, codes, and industry standards (e.g., ASME, AWS, API, ISO). Documentation & Reporting: Prepare detailed inspection reports, including weld maps, visual inspection records, and test results. Ensure all documentation is accurate and up-to-date for client or regulatory review. Welding Procedures: Review and approve welding procedures, welding procedure specifications (WPS), and procedures qualification records (PQR) to ensure compliance with industry codes. NDT Methods: Utilize various NDT techniques (e.g., Ultrasonic Testing (UT), Magnetic Particle Testing (MPT), Radiographic Testing (RT), Dye Penetrant Testing (DPT)) to evaluate weld quality and detect any defects. Monitoring & Supervision: Monitor welding activities on-site or in the workshop, ensuring that welding operations are carried out according to project specifications, industry codes, and safety standards. Defect Identification & Reporting: Identify and report welding defects, including cracks, porosity, undercuts, and other common welding defects. Recommend corrective actions to prevent recurrence. Quality Control: Ensure that the welding team adheres to the quality standards and conducts work to the highest safety and quality standards. Welder Qualification: Assess and verify the qualifications of welders by performing visual inspections and witnessing weld tests. Training & Mentoring: Provide training and guidance to junior welding inspectors, welders, and fabrication personnel, sharing knowledge on welding standards and best practices. Compliance: Ensure compliance with safety regulations, quality standards, and environmental policies at all stages of the welding process. Troubleshooting: Work closely with the engineering and production teams to troubleshoot and resolve any welding-related issues or concerns during construction or manufacturing processes. SECTOR: Engineering and Technical Job Reference #: JHB000435/AH

Job Purpose: To conduct social survey interviews by telephone with members of the public and businesses. Duties & Responsibilities: After completing initial training, a freelance interviewer’s work will involve: • Attending project briefings • Conducting telephone interviews using appropriate equipment, as indicated in What will you need? section, • Adhering to interview protocols (e.g. probing fully, following question wording precisely, coding correctly etc) • Attending training as and when required • Being available for contact by telephone with the Project Coordinator, and Mthente Staff members • Having a commitment to Mthente’s policies and quality procedures for freelancers • This role will include elements of cold calling What will you need? • Functional computer/laptop with at least Windows 7 • Computer must be compatible with the software used by Mthente for VOI calls • 24kbps to be able to call through the system, • Access to fixed line Broadband or at least 1GB of data • Basic computer skills • Professional Telephone manner • Good level of computer skills • Good standard of written and spoken English • to be a self-motivated individual • Good listening and persuasion skills • At least 20 hours of availability each week (working a minimum of 6-hour days) Essential Competencies • Following instructions and procedures • Persuading and influencing • Presenting and communicating information • Delivering results and meeting customer expectations • Adapting and responding to change • Coping with pressures and setbacks • Respond positively to Project Coordinator feedback and guidance Desirable Competencies: • Adhering to principles and values • Working with people • Writing and reporting Remuneration: Rate dependent on project. Rate per completed interview Please complete information on the link below https://www.surveymonkey.com/r/fieldworkerdatabase

 Enviromental Officer - SecundaQualifications• National Diploma or BTech in Environmental Science or Environmental management• Knowledge and understanding of SA Environmental legislation and regulations is essential• Knowledge and understanding of environmental impacts and aspects associated with construction projects• Minimum of 3-5 years working experience in environmental management in construction-related projects• Training in ISO14001:2015 will be an advantage• Computer literacy skills e.g., Word, Excel, Outlook, and Power Point.• Driver’s licence and own transportExperience• Develop, implement, and maintain environmental-related processes and associated plans, procedures and standards.• Translate client’s specifications into project-specific procedures.• Conduct and document environmental aspects and impacts assessments.• Participate in the establishment and implementation of the Environmental Management System.• Monitor compliance to environmental requirements; conditions of the Environmental authorisation and recommendations of the Environmental management programme (EMPr).• Compile environmental monitoring reports and maintain relevant registers.• Coordinate contractor environmental-related activities.Required Outputs and Responsibilities• Conduct site inspections (waste management, storm water systems, Hazardous materials management, etc.) to ensure that environmental impacts are kept to a minimum• Participate in the review of method statements• Facilitate environmental awareness and induction to convey contents of the EMPR to the project team and contractors• Conduct environmental audits on contractors• Collate data required for the monthly environmental compliance report as prescribed in the environmental authorization• Investigate and report complaints of hazardous working conditions to the project or line manager and/or other appropriate senior management.• Conduct project and facility environmental inspections.• Attend Occupational Health, Safety and Environmental Committee meetings.• Coordinate registration and removal of hazardous waste.• Liaise with Department of Labour inspectors.• Arrange for Occupational Health and Safety testing and/or evaluations of the workplace by external agencies/consultants as may be necessary.• Act as liaison with all related governmental bodies and regulating agencies.• Develop, review, and update appropriate sections of the projects/company Emergency Procedures and Plans.• Compile environmental statistics / month reports / review reports.• Record and investigate environmental incidents and public complaints• Maintain public complaints register• Maintain a non-conformance register• Assume other duties that may be assigned. Personal Attributes• Strong customer orientation - good judgment; emotional resilience.• Knowledge of applicable environment codes, standards, and legislation.• Must be able to develop and/or respond to environmental requirement fit for purpose solutions to clients and other stakeh

Enviromental Officer - SecundaQualifications• National Diploma or BTech in Environmental Science or Environmental management• Knowledge and understanding of SA Environmental legislation and regulations is essential• Knowledge and understanding of environmental impacts and aspects associated with construction projects• Minimum of 3-5 years working experience in environmental management in construction-related projects• Training in ISO14001:2015 will be an advantage• Computer literacy skills e.g., Word, Excel, Outlook, and Power Point.• Driver’s licence and own transportExperience• Develop, implement, and maintain environmental-related processes and associated plans, procedures and standards.• Translate client’s specifications into project-specific procedures.• Conduct and document environmental aspects and impacts assessments.• Participate in the establishment and implementation of the Environmental Management System.• Monitor compliance to environmental requirements; conditions of the Environmental authorisation and recommendations of the Environmental management programme (EMPr).• Compile environmental monitoring reports and maintain relevant registers.• Coordinate contractor environmental-related activities.Required Outputs and Responsibilities• Conduct site inspections (waste management, storm water systems, Hazardous materials management, etc.) to ensure that environmental impacts are kept to a minimum• Participate in the review of method statements• Facilitate environmental awareness and induction to convey contents of the EMPR to the project team and contractors• Conduct environmental audits on contractors• Collate data required for the monthly environmental compliance report as prescribed in the environmental authorization• Investigate and report complaints of hazardous working conditions to the project or line manager and/or other appropriate senior management.• Conduct project and facility environmental inspections.• Attend Occupational Health, Safety and Environmental Committee meetings.• Coordinate registration and removal of hazardous waste.• Liaise with Department of Labour inspectors.• Arrange for Occupational Health and Safety testing and/or evaluations of the workplace by external agencies/consultants as may be necessary.• Act as liaison with all related governmental bodies and regulating agencies.• Develop, review, and update appropriate sections of the projects/company Emergency Procedures and Plans.• Compile environmental statistics / month reports / review reports.• Record and investigate environmental incidents and public complaints• Maintain public complaints register• Maintain a non-conformance register• Assume other duties that may be assigned. Personal Attributes• Strong customer orientation - good judgment; emotional resilience.• Knowledge of applicable environment codes, standards, and legislation.• Must be able to develop and/or respond to environmental requirement fit for purpose solutions to clients and other stakeho

Client in Port Elizabeth is currently searching for a strong Angular /.Net Developer to build and support applications in a technically exciting and challenging industry. Technical Skills and Experience in any of the below: Design, develop, test, document and support applications written in Angular, MVC, C# Angular.NetCore (Highly preferable) Node.js (Preferable) SOLID Design Principles (Practical experience) Practical knowledge of a few Design Patterns Knowledge on NoSQL database Database skills - MySQL / SQL Server / Oracle Knowledge on Entity Framework Knowledge of UX Design (Preferable) Service-oriented architecture (basic) CSS knowledge (basic) Advantageous: C#, Delphi, PHP or other language experience. Source Control (SVN, TFS). Project Management / Bug Tracking - e.g. Jira Testing Tools - Selenium and JVM configuration and tuning. Deployment Tools - e.g. Jenkins Must be bilingual - English and Afrikaans Should you wish to apply for the position, please apply directly via this job board, please ensure that you quote reference number 201807 subject heading or email body. Please note that due to the high volume of CV's received; only shortlisted applicants will be contacted. Should you not receive communication from our offices within two weeks of submission please note that your application will not be considered for this position. We will keep your CV on file and re-establish contact with you should opportunities in line with your expertise become available again. Should you require any additional information give us a call on 021 012 5566. Job Reference #: 201807

KEY OUTPUTS PART OF THE PROGRAM (PROJECT BASED) Lead and coordinate Communities of Practice and Centres of Excellence as agreed Facilitate the implementation of the Manufacturing Way in South Africa Lead the Manufacturing Development Team to ensure; Strategic Alignment Shared Learning''s Best Practice Progress Reviews Work practice reviews (e.g. GEM Audits) / Assessments & verifications and the development and coordination of related improvement plans. Promote Knowledge Management processes in South Africa. Facilitate the identification and implementation manufacturing improvement projects. Facilitate, co-ordinate and lead divisional improvement projects Establish policies and standards for manufacturing services in order to ensure consistency, efficiency, integrity in the maintenance and productivity environments. Develop the one to three years plant business plan to ensure that customer service and productivity objectives are met. Manage the systematic and strategic coordination of all Manufacturing business functions as aligned with the Sales and Operational Planning process (S&OP). Manage the implementation of world class manufacturing processes across Manufacturing for the purpose of ensuring the continuous improvement of short to long-term performance. Manage the synchronisation of all aspects of Manufacturing including flow of materials and final goods. Management and maintenance of the Manufacturing assets at a productive basic condition. Measurement and monitoring of performance trends and the application of focused improvement initiatives in order to increase total system efficiency, effectiveness and reliability. Identification, development and the implementation of the relevant enablers in order to deliver the Plant business plan and budget. Develop and implement people capability enhancement plans to ensure that business improvement objectives are met. Ensure that supply chain planning is aligned to meeting customer needs. QUALIFICATIONS / EXPERIENCE BSc Engineering: Mechanical, Electrical, Industrial Engineering Minimum 5 years experience in manufacturing environment including 3 years experience in implementing supply chain, production or process improvement related initiatives. 3 Years experience as an area manager (e.g. Unit Manager, Manufacturing Excellence Manager) in an FMCG manufacturing environment Experience in leading capital or process improvement projects Demonstrable experience in people change initiatives and process improvement Membership of a professional institute would be advantageous

Caterpillar SA has one of South Africa's largest and most diverse ranges of equipment and tools to deliver on every type of construction project. This extensive range ensures we always have the right resources available, whenever and wherever specialist plant is required. With us you can always be confident you are getting plant in the best condition, with the highest possible maintenance standards. From cranes, hoists and concrete pumps, to access equipment and custom-designed rail vehicles, we offer the very latest in plant technology. We do the hiring of earth moving equipment. We offer cheap and cost effective prices for all our equipment. We rent our equipment to mining, public, construction and civil sector.Below is a list of our equipment that we rent out: Bobcat/skid steers Rollers - 2.5 ton, 10 ton, 14 ton Tippers - 6 cube, 10 cube, 12 cube Tlbs - 4x2, 4x4 Hammer/grab/bucket Dozers - D4, D6, D7, D8, D9 Excavators - 20 ton, 23 ton, 30 ton, 40 ton Water Trucks - 8 000 Ltrs, 10 000L trs, 15 000 Ltrs, 18 000 Ltrs Graders - 120 G, 140 G, 140 H, 140 K Cranes - 8 ton - 220 ton Lowbed Should you need more info please do not hesitate to contact us

East London - To improve efficiency, reduce waste, identify and implement solutions, meetproject deadlines and accurately document the necessary requirements to bedone in accordance with local / global strategic planning and standards incompliance to the Company's Integrity & Anti Bribery Codes, Conflict of InterestPolicy & S.H.E.Q. requirements and to perform delegated S.H.E.Q. tasks andduties & to inform superior about deviationsThe Job RequirementsTechnical? Proficient in Net (C#) programming.? Proficient in W3C standards? Proficient in HTML/ CSS, and Javascript (TypeScript). AngularJS, React,Node.JS or other Javascript frameworks.? Proficient in various SQL and NoSQL based Databased ManagementSystems.? Proficient in various code management and branching strategies (Git Flow,Feature Branching).? Proficient in Object Orientated design and programming.? Proficient in Mapping (ORM) frameworks (e.g. Hibernate, Entity Framework)? Ability to build Web API’s using various programming languagesNode.JS/.Net (C#)? Proficient in Domain Driven design concepts? Proficient in rest API design standards in order to implement them in toFrontend products.? Extensive knowledgeable and experience in DevOps principles and impact ondevelopment lifecycles? Cloud, Container / Kubernetes experience would be beneficialNon-Technical? Strong time management skills and the ability to meet deadlines.? Familiar and comfortable with Agile terminology and teams.? Strong analytical and problem-solving skills.? Good communication skills.? A technical mind-set and analytical approach.? Great attention to detail.? Good leadership skills.Outputs? Integration into a dynamic team building next generation solutions for Daimlerglobally.? Interact with different Daimler clients, exploring and advising on possibilities andsolutions that accomplish their goals.? Agility, flexibility and keen attention to detail in order to manage and advancemultiple projects simultaneously.? Attention to detail during the development and quality assurance testing ofprojects.? You will be joining a team committed to working on high-quality code and will workclosely with the new and legacy products to support clients.? Willing to learn new technologies, teach and share knowledge with other teammembers.? Project management of all technology development initiatives? Coach and mentoring of Software Developers and System Engineers.? Promotion of a continuous improvement culture within the team.? Adhere to all guidelines and requirements to ensure compliance standards ofquality, security, extensibility etc.Qualification and Experience? Minimum NQF 7 - BSC/BCom/BTech in Information Technology, InformationSystems Engineering or Computer Science or relevant equivalent? Certification in Relevant programming will be advantageous? Minimum of 5 years’ experience in software development or At least 6 monthsparticipation in our Graduate Development Programme? 3-5 years’ Project Management experience advantageous

Key Responsibilities: Design and develop electrical systems for various building projects, including power distribution, lighting, fire detection, and security systems. Conduct site inspections, feasibility studies, and technical assessments. Prepare and review electrical drawings, specifications, and documentation. Collaborate with architects, mechanical engineers, and project managers to ensure seamless project execution. Ensure compliance with relevant electrical codes, standards, and regulations. Provide technical support during the construction and commissioning phases. Requirements: Bachelor's Degree in Electrical Engineering or equivalent. Minimum 4 years of experience in electrical building services design. Proficiency in AutoCAD, Revit, and electrical design software (e.g., Dialux, ETAP). Strong knowledge of SANS, BS, or IEC electrical standards. Experience with HV and LV power distribution. Ability to manage multiple projects and meet deadlines. Excellent problem-solving and communication skills. Professional registration (ECSA Pr. Eng/Pr. Tech Eng) is advantageous.

GARSFONTEIN,MORELETA PARK,MOIKLOOF,WATERKLOOF,MENYLIN,FAERIE GLEN ELECTRICIANS 0716260952 / 0127546725 We are tradesman specialising in electrical wiring of buildings,stationery machines and related equipment.we install new electrical components and maintain and repair of existing electrical infrastructure. Our services are so affordable and much more distinctive as compared to our competitors.we ensure that all our clients receive quality,reliable workmanship and excellent services every time we embark on a project.. OUR SERVICES INCLUDES: 1.exterior lighting services and repair 2.refrigeration mechanic(cold room maintenance) 3.circuit breaker and fuse box repair 4.conduit inspection and repair 5.light switch inspection and repair 6.industrial and domestic wiring 7.new electric fencing installation and repair maintenance 8.electrical garage and gate motors(installation and repair) 9.camera installation 10.installing timers on all electrical appliances e.g geysers 11.valves and burst pipes 12.security and flood lights 13.all power failures 14.earth leakages 15. pool motors and any other related electrical works For all your electrical,refrigeration and air conditioning services in Pretoria,Centurion and Midrand ,do not hesitate to contact Martin on 0716260952 / 0127546725

GARSFONTEIN,MORELETA PARK,MOIKLOOF,WATERKLOOF,MENYLIN,FAERIE GLEN ELECTRICIANS 0716260952 We are tradesman specialising in electrical wiring of buildings,stationery machines and related equipment.we install new electrical components and maintain and repair of existing electrical infrastructure. Our services are so affordable and much more distinctive as compared to our competitors.we ensure that all our clients receive quality,reliable workmanship and excellent services every time we embark on a project.. OUR SERVICES INCLUDES: 1.exterior lighting services and repair 2.refrigeration mechanic(cold room maintenance) 3.circuit breaker and fuse box repair 4.conduit inspection and repair 5.light switch inspection and repair 6.industrial and domestic wiring 7.new electric fencing installation and repair maintenance 8.electrical garage and gate motors(installation and repair) 9.camera installation 10.installing timers on all electrical appliances e.g geysers 11.valves and burst pipes 12.security and flood lights 13.all power failures 14.earth leakages 15. pool motors and any other related electrical works For all your electrical,refrigeration and air conditioning services in Pretoria,Centurion and Midrand ,do not hesitate to contact Owen on 0794584481

Fruit exporter requires Documentation Controller. Minimum of 5 years in fruit industry export documentation essential. Requirements: Grade 12 / Matric Training course in clearing & forwarding process Industry training of export requirements / protocols Min 5 years in fruit industry export documentation Understand PPECB/DAFF/Phytclean/Titan export certification process Knowledge of documents required for EU/RU/CAN markets Knowledge of shipping line SI/BOL process and terms Good understanding of export protocols – e.g. CBS, FMS, FFMS Good understanding of fruit/pallet coding structures Ability to supervise/lead others Duties will include, but aren’t limited to: Passed/Rejected documents (Special markets) SI’s/Dispatches/Shipping Information in QX. Shipping information to C&F agent, clients/consignees and other parties. Shipping documentation Freight and landside invoice payments. Drive project Titan implementation Job Reference #: CPT000092/SG

Job Requirements Technical Proficient in Net (C#) programming. Proficient in W3C standards Proficient in HTML/ CSS, and Javascript (TypeScript). AngularJS, React, Node.JS or other Javascript frameworks. Proficient in various SQL and NoSQL based Databased Management Systems. Proficient in various code management and branching strategies (Git Flow, Feature Branching). Proficient in Object Orientated design and programming. Proficient in Mapping (ORM) frameworks (e.g. Hibernate, Entity Framework) Ability to build Web API’s using various programming languages Node.JS/.Net (C#) Proficient in Domain Driven design concepts Proficient in rest API design standards in order to implement them in to Frontend products. Extensive knowledgeable and experience in DevOps principles and impact on development lifecycles Non-Technical Strong time management skills and the ability to meet deadlines. Familiar and comfortable with Agile terminology and teams. Strong analytical and problem-solving skills. Good communication skills. A technical mind-set and analytical approach. Great attention to detail. Good leadership skills. Qualifications Minimum NQF 7 – Bachelor of Science/Bachelor of Commerce/Bachelor of Technology in Information Technology, Information Systems Engineering or Computer Science or relevant equivalent Certification in Relevant programming will be advantageous Minimum of 5 years’ experience in software development 3-5 years’ Project Management experience advantageous Please Note: if you have not been contacted within 1 week consider your application unsuccessful

Requirements: Proficient in Net (C#) programming. Proficient in W3C standards Proficient in HTML/ CSS, and Javascript (TypeScript). AngularJS, React, Node.JS or other Javascript frameworks. Proficient in various SQL and NoSQL based Databased Management Systems. Proficient in various code management and branching strategies (Git Flow, Feature Branching). Proficient in Object Orientated design and programming. Proficient in Mapping (ORM) frameworks (e.g. Hibernate, Entity Framework) Ability to build Web API’s using various programming languages Node.JS/.Net (C#) Proficient in Domain Driven design concepts Proficient in rest API design standards in order to implement them in to Frontend products. Extensive knowledgeable and experience in DevOps principles and impact on development lifecycles Qualification and Experience: Minimum NQF 7 - BSC/BCom/BTech in Information Technology, Information Systems Engineering or Computer Science or relevant equivalent Certification in Relevant programming will be advantageous Minimum of 5 years’ experience in software development 3-5 years’ Project Management experience advantageous Please note: if you have not been contacted within 1 week consider your application unsuccessful

The position for a Network Engineer is available within Xerox Eastern Cape. Certain qualities and skills required for the position: A Network Engineer is an IT professional responsible for analysing, designing, installing, configuring, maintaining, and repairing of network infrastructure and application components. Network Engineer Job Responsibilities: Designing and implementing new network solutions and/or improving the efficiency of current networks Installing, configuring, and supporting network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP Configure and install various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS) Perform network maintenance and system upgrades including service packs, patches, hot fixes, and security configurations Monitor performance and ensure system availability and reliability Monitor system resource utilization, trending, and capacity planning Provide Level-2/3 support and troubleshooting to resolve issues Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the network infrastructure Select and implement security tools, policies, and procedures in conjunction with the company’s security team Establishes and maintains network performance. Builds net configurations and connections. Troubleshoots network problems. IP address auditing. Establishes networking environment by designing system configuration and directing system installation. Defines, documents, and enforces system standards. Maximizes performance by troubleshooting network problems and outages and scheduling upgrades. Configures router and switches Update’s data servers and network equipment. Secures network system by establishing and enforcing policies and defining and monitoring access. Updates job knowledge by participating in educational opportunities, reading professional publications, and participating in professional organizations. Accomplishes information systems and organization mission by completing related results as needed. Network Engineer Qualifications/Skills: Network knowledge Network design and implementation Network troubleshooting Must have 5 years’ experience in HP switches and routers Project management Problem solving and analytical skills Time-management skills Strong documentation skills LAN knowledge Network hardware configuration Network performance tuning People management Education and Experience Requirements: Computer Science or a related subject Five to 10 years of experience in network administration MCSE Must have a HP network Background Qualified applicants who wish to be considered for this position should apply by emailing their CV to recruitment@xecape.co.za

One of the leading global suppliers of Premium and Luxury Cars and one of the world's largest manufacturer of commercial vehicles. Seeks the expertise of a.Net (C#) Full Stack Developer to join their Dynamic team. Minimum Qualification: * Minimum NQF 7 - BSC/BCom/BTech in Information Technology, Information Systems Engineering or Computer Science or relevant equivalent Minimum Years of Experience: * Minimum 5 + Years' experience years' experience in software development (full stack) * 3-5 years' Project Management experience advantageous Technical and Functional Skills: * Must have Docker and/or Kubernetes * Proficient in Net (C#) programming. * Proficient in W3C standards * Proficient in HTML/ CSS, and Javascript (TypeScript). AngularJS, React, Node.JS or other Javascript frameworks. * Proficient in various SQL and NoSQL based Databased Management Systems. * Proficient in various code management and branching strategies (Git Flow, Feature Branching). * Proficient in Object Orientated design and programming. * Proficient in Mapping (ORM) frameworks (e.g. Hibernate, Entity Framework) * Ability to build Web API's using various programming languages Node.JS/.Net (C#) * Proficient in Domain Driven design concepts, rest API design standards in order to implement them into Frontend products * Proficient in rest API design standards in order to implement them in to Frontend products. * Extensive knowledgeable and experience in DevOps principles and impact on development lifecycles Should this speak to your skill set and expertise, hurry now and apply!!! *Desired Skills: * * kubernetes * W3C * docker *.Net

Machine with high performance designed for work over long distances. Used for assembly / disassembly of the railway track with K-type fastenings or other types where the attachment is mounted with a screw (e.g. Pandrol e-clip). TECHNICAL PARAMETERS: Engine – Honda GX200 or GX270 Power – 4,1 kW/ 3800 U/min ** We follow detailed maintenance checklists that are in line with maintenance manuals and manufacturer recommendations. ** All offered equipment is fully serviced in our workshop and ready to be deployed on your project. ** All machines are provided with a 30-day start-up warranty. ** Price is VAT excluded.