Port poe

Dahua 10 Port Unmanaged Desktop Switch with 8 Port PoE, 8x RJ-45 10/100 Mbps (PoE), 2x RJ-45 10/100/1000 Mbps (Uplink), 96 W PoE Power, Long distance PoE Overview: PFS3010-8ET-96 10-Port Unmanaged Desktop Switch with 8-Port PoE * The parameters and datasheets below can only be applied to V2.0 (version 2.0) Intelligent PoE 8-pin assignment PoE power supply Long distance PoE PoE watchdog Wide working temperature Specifications: Product Code DH-PFS3010-8ET-96-V2 Hardware Data Transmission Port Port 1-8: 8 x RJ-45 10/100 Mbps (PoE) Port 9-10: 2 x RJ-45 10/100/1000 Mbps (Uplink) Power Supply 48 V – 57 V DC Operaing Temperature -10 °C to +55 °C (+14°F to +131°F) Operating Humidity 5% – 95% (RH) Storage Temperature -20 °C to +70 °C (-4°F to +158°F) Storage Humidity 5% – 95% (RH) Power Consumption Idling: 3 W Full load: 96 W Performance Capacity 5.60 Gbps Packet Forwarding Rate 4.17 Mpps Packet Buffer Memory 4 Mbit MAC Table Size 8K Communication Standard IEEE802.3/IEEE802.3u/IEEE 802.3ab/IEEE802.3x PoE PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE, IEEE802.3bt PoE Power 96 W Power Consumption Management Yes PoE Pin Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Long Distance PoE 250 m long distance PoE transmission PoE Watchdog Yes General Statics Protection Air discharge: 8 kV Contact discharge: 6 kV Thunder-proof Common mode: 4 kV Differential mode: 2 kV Net Weight 0.50 kg (1.10 lb) Gross Weight 1.32 kg (2.91 lb) Product Dimensions 190 mm x 100 mm x 30 mm (7.48″ x 3.94″ x 1.18″)

Tenda 16 Port Ethernet Switch with 16 Port PoE | TEF1118P-16-150W

Buy Ubiquiti EdgeSwitchXP 8 Port PoE 2xSFP Gigabit Switch | ES-10XP for R2,825.00

Buy Samsung ieS4028FP 24 Port Poe Managed Switch for R2,999.00

Buy Samsung ieS4028FP 24 Port Poe Managed Switch for R1,499.00

Buy *** POE CLEARANCE SALE *** CISCO CATALYST 3560-24PS 24 PORT POE SWITCH for R700.00

Buy *** POE CLEARANCE SALE *** CISCO CATALYST 3560-24PS 24 PORT POE SWITCH for R599.00

Dahua 10 Port Gigabit Unmanaged Desktop Switch with 8 Port PoE, 8x 10/100/1000 Mbps Base-TX PoE Ethernet Ports, 2x 10/100/1000 Mbps Base-TX Ethernet Ports, 96W whole PoE budget, Port 1 60W PoE budget, Port 2-8 30W PoE budget, 20 Gbps switching capacity Overview: PFS3010-8GT-96 10-Port Gigabit Unmanaged Desktop Switch with 8-Port PoE Intelligent PoE 8-pin assignment PoE power supply Long distance PoE PoE watchdog BT 90W All-giga ports Wide working temperature Specifications: Product Code DH-PFS3010-8GT-96-V2 Service Port Eight 10/100/1000Mbps Base-TX PoE Ethernet ports Two 10/100/1000Mbps Base-TX Ethernet ports Power Supply 48V DC-57V DC Operating Temperature -10°C to + 55°C (-14°F to 131°F) Operating Humidity 10%-90% Power Consumption Idling: 5W Full load: 96W PoE Budget Port 1 ≤ 60W, Port 2-8 ≤ 30W, whole PoE budget ≤ 96W PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE PoE Pin Assignment PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Switching Capacity 20 Gbps Packet Forwarding Rate 14.88 Mpps MAC Table Size 4K Jumbo Frame 9216 bytes Communication Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab ESD Air discharge: 8kV Contact discharge: 6kV Thunderproof Common mode: 6kV Differential mode: 4kV Net Weight 0.50 kg (1.1 lb) Gross Weight 1.32 kg (2.91 lb) Product Dimensions 190 mm x 100 mm x 30 mm (7.48″ x 3.94″ x 1.18″)(W x L x H) Packaging Dimensions Packing box: 303 mm x 262 mm x 72 mm (11.92″” x 10.31″” x 2.83″”) Protective box: 549 mm x 325 mm x 397 mm (21.61″” x 12.80″” x 15.63″”)(W x L x H) Package 10 devices in one package Certifications CE: EN60950 FCC

Description M-Link 8 PORT 10/100 POE+2 PORT Switch 8PORT 10/100 POE+2PORT – TXE188 8-Ports 10/100Mbps PoE + 2-Ports 10/100Mbps Unmanaged Ethernet Switch Description TXE188 is a 10-port 10/100Mbps Desktop PoE Switch that provides the seamless network connection These PoE ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs) In this situation, the electrical power is transmitted along with data in one single Cable Allowing you to expand your network where there are no power lines or outlets here you wish to fix devices such as Aps IP Cameras or IP Phones, etc VLAN isolation to meet security monitoring requirements Support extension technology Data transmission and Power Supply up to 250m Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed. TXE188 is easy to install and use. It requires no configuration and installation With desktop design, outstanding performance and quality The 10-Port 10/100Mbps Desktop PoE switch is a great selection for expanding your home or office network Features Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3x,IEEE802.3az,IEEE802.1q Ethernet standards; Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE port, all power up to 117W VLAN isolation to meet security monitoring requirements Support 10 x10/100Mbps Auto-negotiation RJ45 ports with 8 port PoE function (POE1-8); Support extension technology, up to 250m transmission distance Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode and backpressure for Half-duplex Mode LED indicators for monitoring Port Link / Activity Internal power supply, exquisite design, suitable for desktop use b'/xc2/xa0'

Description M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

M-Link 8 PORT 10/100 POE+2 PORT Switch 8PORT 10/100 POE+2PORT – TXE188 8-Ports 10/100Mbps PoE + 2-Ports 10/100Mbps Unmanaged Ethernet Switch Description TXE188 is a 10-port 10/100Mbps Desktop PoE Switch that provides the seamless network connection These PoE ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs) In this situation, the electrical power is transmitted along with data in one single Cable Allowing you to expand your network where there are no power lines or outlets here you wish to fix devices such as Aps IP Cameras or IP Phones, etc VLAN isolation to meet security monitoring requirements Support extension technology Data transmission and Power Supply up to 250m Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed. TXE188 is easy to install and use. It requires no configuration and installation With desktop design, outstanding performance and quality The 10-Port 10/100Mbps Desktop PoE switch is a great selection for expanding your home or office network Features Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3x,IEEE802.3az,IEEE802.1q Ethernet standards; Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE port, all power up to 117W VLAN isolation to meet security monitoring requirements Support 10 x10/100Mbps Auto-negotiation RJ45 ports with 8 port PoE function (POE1-8); Support extension technology, up to 250m transmission distance Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode and backpressure for Half-duplex Mode LED indicators for monitoring Port Link / Activity Internal power supply, exquisite design, suitable for desktop use b'/xc2/xa0'

M-Link 4 PORT 10/100 POE + 1 LAN Switch 4 PORT 10/100 POE + 1 LAN – TXE104 b'/xc2/xa0' 5 PORT 10/100 POE – TXE104 Hardware Specifications Network Connector: 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX PoE Inject Port: 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) LED Display: System Power (Green) Per PoE port: PoE (Red/Blue, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) DIP Switch: Standard mode for 100M Extend mode for 250m (Based on the cable category) Switch Architecture: Store and Forward switch architecture MAC Address Table: 1K MAC address table with auto learning function EST Protection: 4KV Switch Fabric: 1Gbps Switch Throughput: 0.74Mpps @64bytes Maximum Packet Size: 1536bytes b'/xc2/xa0'

24 port poe switch smart web switch pricedrop to R1300 call deon 0814902774

Dahua 16 port Gigabit PoE Unmanaged Switch, PoE budget total 190W, 16x RJ-45 10M/100M/1000M (PoE) Overview: PFS3016-16GT-190 16-Port Unmanaged Gigabit PoE Switch Organge port supports 60W Hi-PoE standard Intelligent PoE Plug-and-play Ethernet port supports eight-pin PoE Wide range of working temperature: -10 to +55°C (14°F to +131°F) Full gigabit port design Specifications: Product Code DH-PFS3016-16GT-190 Performance Layer Layer 2 Switching Capacity 32 Gbps Packet Forwarding Rate 23.808 Mpps Packet Buffer Memory 4.1 Mb MAC Table Size 8K Hardware Feature Standard Power Supply Yes PoE Yes Ethernet Port 16 Ethernet Port Rate 1 Gbps Number of Business Card Slots Port 1-port 16: 16 x RJ-45 10M/100M/1000M (PoE) Power Supply 100V AC -240V AC Operating Temperature -10°C to +55°C (14°F to +131°F) Operating Humidity 10%-90% Storage Humidity 5%-95% Power Consumption Idling: 18W Full load: 190W PoE PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE PoE Budget Port 1-port 2 ≤ 60W, port 3-port 16 ≤ 30W, total ≤ 190W PoE Pin Assignment PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) General ESD Air discharge: 8kV Contact discharge: 6kV Thunderproof Common mode: 4kV Differential mode: 2kV Product Dimensions 285 mm x 104.6 mm x 28 mm (11.22″ x 4.12″ x 1.10″) Packaging Dimensions 455 mm x 270 mm x 92 mm (17.91″ x 10.63″ x 3.62″)

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Description M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda PoE injector 15W 10/100 Mbps Features: What It Does – Main Features PoE injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Product Code POE15F Hardware Network standards IEEE802.3, IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100-240V AC 50/60Hz 48V/0.3A DC(Power Adapter Output) Mounting Desktop mounting: support Environment Operating Temperature: 0°C~45°C Storage Temperature: -40°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC, CE, RoHS

Description 6 Port Gigabit Passive PoE Injector This 6-port passive PoE injector allows you to power six devices from a single power supply. Gigabit Ethernet connectivity means no bottlenecks and maximum throughput. Simply connect your Ethernet cables to the LAN ports and your PoE devices to the POE ports.

Buy TrendNet (TEW-825DAP) AC1750 Dual Band PoE Access Point with Gigabit PoE LAN port - Concurrent 1300 for R2,624.00

Scoop 6 Port Fast Ethernet Switch with 4 AI PoE Ports and 2 FE Uplink

Buy Ubiquiti 8 Port Gigabit PoE Passthrough Switch for R2,015.00

Buy Ubiquiti 24 Port Gigabit + SFP 250W PoE EdgeSwitch | ES-24-250W for R8,688.00

Buy Ubiquiti 16 Port Gigabit 150W PoE 2SFP UniFi Switch | US-16-150W for R7,796.25

Buy MikroTik Cloud Router Switch 8 Port Gigabit PoE 4SFP | CRS112-8P-4S-IN for R3,348.00

Buy Ubiquiti 8 Port Gigabit Managed PoE Pass-through UniFi Switch | US-8 for R2,350.00

Buy Ubiquiti 16 Port Managed Gigabit + 2 SFP 150W PoE - Ubiquity for R6,399.00