Poe ethernet ports

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda PoE injector 15W 10/100 Mbps Features: What It Does – Main Features PoE injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Product Code POE15F Hardware Network standards IEEE802.3, IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100-240V AC 50/60Hz 48V/0.3A DC(Power Adapter Output) Mounting Desktop mounting: support Environment Operating Temperature: 0°C~45°C Storage Temperature: -40°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC, CE, RoHS

Tenda TEG1124P-24-250W 24-Port Gigabit Ethernet Switch TEG1124P-24-250W is a Tenda Gigabit Ethernet PoE switch that o ers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras 6KV Lightning Protection PoE Switch is the only engineering switch In real projects, APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged. Tenda TEG11 series switches have a professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture. CCTV, Standard, VLAN and Isolation Operation Modes Offered CCTV: in this mode, the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the uplink port of the switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback. Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN: ports 1 to 22 of TEG1124P-24-250W are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing. Isolation: ports 1 to 12 and Ports 13 to 24 of TEG1124P-24-250W belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. 225W PoE power supply simplified wiring Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras. Specifications Standard b'&' Protocol IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at Indicator 24*Link/Act per device 24*PoE per device 1*Power per device Interface 24 10/100/1000Base-T ports(Data/Power) Lightning Protection 6KV Store b'&' Forward Yes exchange capacity 48 Gbp Packet Forwarding Rate 35.6Mpps RAM Data Buffer 4Mb MAC Address Table 4K PoE supply management Port 1-24 support IEEE802.3at/af PoE standard PoE through pin 1 2 4 5 +/3 6 7 8 – Input Power AC: 100-240V～50/60Hz Dimension 440*178*44mm(W x D x H) Power Consumption in full conguration: b' PoE Max Power Supply: 225W Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively. Isolation: ports 1 to 12 and Ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Mecer Altai PoE injector for A8n PE-8N00-00 The Altai Power over Ethernet Injector is a device that allows for power over Ethernet (PoE) in a network. It has three ports, one for input (AC 100-240V~1.5A 47-63Hz), one for output (DC 48VDC – 1.55A(max)), and one for power cord. Features Altai Power over Ethernet (PoE) Injector It contains 3 ports “ENET Input” “AP/BR Output” and port for power cord Input: AC 100-240V~1.5A 47-63Hz output: DC 48VDC – 1.55A(max) Altai Power over Ethernet (PoE) Injector for A8 Specifications Manufacturer: Altai FactoryNumber: PE-8N00-00 Product Type: PoE (Power over Ethernet) Injector

Scoop 6 Port Fast Ethernet Switch with 4 AI PoE Ports and 2 FE Uplink

Buy Scoop 10 Port Fast Ethernet Switch with 8 AI PoE Ports and 2 FE Uplink for R861.28

Description 6 Port Gigabit Passive PoE Injector This 6-port passive PoE injector allows you to power six devices from a single power supply. Gigabit Ethernet connectivity means no bottlenecks and maximum throughput. Simply connect your Ethernet cables to the LAN ports and your PoE devices to the POE ports.

Description M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

M-Link 8-Ports 10/100/1000Mbps PoE Unmanaged Network Switch TXE143 is a 10-Ports 10/100/1000Mbps Desktop PoE network switch that provides a seamless network connection. These PoE Ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with Data in one single Cable. Allowing you to expand your network where there are no power lines or outlets. Where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. VLAN isolation to meet security monitoring requirements Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic. And ensure that the upstream channel is unobstructed. TXE143 is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance, and quality. The 10-Ports 100/100/1000Mbps Desktop PoE switch is a great selection for expanding your home or office network Features: Comply with IEEE802.3, IEEE802.3i,IEEE 802.3u,IEEE802.3ab, IEEE802.3x,IEEE802.3az, IEEE802.1q Ethernet standards Supports IEEE802.3af, IEEE802.3at PoE standards Supports PoE power up to 30W for each PoE Port, all power up to 120W VLAN isolation to meet security monitoring requirements Support 10 x10/100/1000Mbps Auto-negotiation RJ45 ports with 8 ports PoE function (port1-port8) Independent Uplink Port can ensure that the Port can easily cope with sudden high traffic And ensure that the upstream channel is unobstructed Supports IEEE802.3x flow control for Full Half-duplex Mode; LED indicators for monitoring Port Link / Activity; Internal Power Supply, exquisite design, suitable for Desktop use

Buy Scoop 10 Port Gigabit Ethernet Switch with 8 AI PoE and 2 Uplink Ports for R1,264.00

Buy Netgear N.GS108PE-300EUS 8 Port 10/100/1000 Gigabit Ethernet Plus Managed Switch with 4 Ports POE(50 for R3,256.24

Tenda 8 -Port PoE Desktop Switch sealed in box. Features and benefits: - 9 10/100 Base-TX RJ45 ports - up to 8 ports of IEE 802.3af/802.3at devices powered - 58-watt PoE budget - Each port supports 51V DC power to PoE Powered Device - 6KV lighting protection - Extend Ethernet mode with 250 m tarnsmisiion distance - Plug and play design, no configuration required Unfortunately purchased the incorrect switch for my busines set up.

The Cudy PE25 2.5Gbps PCI Express Network Adapter is a great way to expand your Desktop PCs network options. It features a high-speed Ethernet port that supports 2.5Gbps speeds over a standard Cat5e or higher cables at distances up to 100m. Whether you use a personal PC or a hosting server, this network adapter gives you the performance you need to get the job done. Its PCI Express 1x slot makes it simple and easy to install on any motherboard that supports PCI-E x1. FEATURES: IEEE802.3bt/IEEE802.3at/IEEE802.3af compliant IP67 waterproof enclosure for outdoor use One gigabit PoE input port and Two-gigabit output PoE ports Extend additional 100 meters for PoE Network Wall-Mount design for any application scenario Plug and play, no additional power supply required SPECIFICATIONS: Chipset: RTL8125 Standards: IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab / IEEE 802.3az / IEEE 802.3bz Network media: 10Base-T,cat3 or above UTP,1000Base-Tx,cat5 or above UTP Data rate: 10/100/1G/2.5Gbps Interface: PCI Express 1x slot Auto MDIX: YES Full Duplex Support: YES MTBF: 376,212 Hours LED Indicator: Link/Act, Speed Port number: 1 x RJ45 Support OS: Windows®10(32/64), Win7 (32/64), Win8,8.1 (32/64) Windows Server® 2012, 2008 LINUX up to 4.15 Product Dimensions: 7.2 x 5 x 0.2 cm WHAT’S IN THE BOX: Cudy PE25 2.5Gbps PCI Express Network Adapter – Black/Red x1

Dahua 16 port Gigabit PoE Unmanaged Switch, PoE budget total 190W, 16x RJ-45 10M/100M/1000M (PoE) Overview: PFS3016-16GT-190 16-Port Unmanaged Gigabit PoE Switch Organge port supports 60W Hi-PoE standard Intelligent PoE Plug-and-play Ethernet port supports eight-pin PoE Wide range of working temperature: -10 to +55°C (14°F to +131°F) Full gigabit port design Specifications: Product Code DH-PFS3016-16GT-190 Performance Layer Layer 2 Switching Capacity 32 Gbps Packet Forwarding Rate 23.808 Mpps Packet Buffer Memory 4.1 Mb MAC Table Size 8K Hardware Feature Standard Power Supply Yes PoE Yes Ethernet Port 16 Ethernet Port Rate 1 Gbps Number of Business Card Slots Port 1-port 16: 16 x RJ-45 10M/100M/1000M (PoE) Power Supply 100V AC -240V AC Operating Temperature -10°C to +55°C (14°F to +131°F) Operating Humidity 10%-90% Storage Humidity 5%-95% Power Consumption Idling: 18W Full load: 190W PoE PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE PoE Budget Port 1-port 2 ≤ 60W, port 3-port 16 ≤ 30W, total ≤ 190W PoE Pin Assignment PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) General ESD Air discharge: 8kV Contact discharge: 6kV Thunderproof Common mode: 4kV Differential mode: 2kV Product Dimensions 285 mm x 104.6 mm x 28 mm (11.22″ x 4.12″ x 1.10″) Packaging Dimensions 455 mm x 270 mm x 92 mm (17.91″ x 10.63″ x 3.62″)