Knowledge siemens serv1

Job Position: Maintenance Technician Ref: 3750 Location: Port Elizabeth Salary: commensurate with experience and qualification Email your updated CV to recruit@onlinepersonnel.co.za Qualifications / Requirements: • N Diploma /National Diploma / Degree in Mechanical, Electrical Engineering Mechatronics or relevant engineering qualification • Minimum of 3 years’ experience in a maintenance environment • Possess skills on AC and DC control speed drives, preferably SEW and Siemens • Strong problem solving skills • Strong programming experience, preferably Siemens Simatic S7/TIA Portal, would be advantageous • Be able to install and change IP addresses, modify and analyse any deviation of machine performance • Understanding of network architecture and network topologies would be an advantage • Knowledge of Siemens Serv1 and 2 • Knowledge of Profibus, Interbus and Profinet. Profisafe would be advantageous • Knowledge of S7 distributed safety would be an added advantage • Be prepared to work shift, weekends, additional and emergency hours • High proficiency with Microsoft Office Package • Ability to communicate effectively at various levels, both verbal and written • Good attendance record Key Performance Areas: • Modification and analysis of any deviation of machine performance from manufacturer’s specfications • Responsible for identifying and sourcing critical spares for equipment in work area • Maintaining, faultfinding and repair equipment in line with health and safety protocols and standards • Analyse breakdowns and implement preventative measures to eliminate reoccurrences • Conduct routine and non-routine maintenance tasks • Support all maintenance personnel during faultfinding processes in order to improve plant availability and ensure high levels of plant readiness at all times • Ensure that backups of all critical operating files, e.g. PLC programs, Robots, AC/DC Drives are maintained Responsibility: Qualifications / Requirements: • N Diploma /National Diploma / Degree in Mechanical, Electrical Engineering Mechatronics or relevant engineering qualification • Minimum of 3 years’ experience in a maintenance environment • Possess skills on AC and DC control speed drives, preferably SEW and Siemens • Strong problem solving skills • Strong programming experience, preferably Siemens Simatic S7/TIA Portal, would be advantageous • Be able to install and change IP addresses, modify and analyse any deviation of machine performance • Understanding of network architecture and network topologies would be an advantage • Knowledge of Siemens Serv1 and 2 • Knowledge of Profibus, Interbus and Profinet. Profisafe would be advantageous • Knowledge of S7 distributed safety would be an added advantage • Be prepared to work shift, weekends, additional and emergency hours • High proficiency with Microsoft Office Package • Ability to communicate effectively at various levels, both verbal and written • Good attendance record Key Performance Areas: • Modification and analysis of any deviation of machine performance from manufacturer’s specfications • Responsible for identifying and sourcing critical spares for equipment in work area • Maintaining, faultfinding and repair equipment in line with health and safety protocols and standards • Analyse breakdowns and implement preventative measures to eliminate reoccurrences • Conduct routine and non-routine maintenance tasks • Support all maintenance personnel during faultfinding processes in order to improve plant availability and ensure high levels of plant readiness at all times • Ensure that backups of all critical operating files, e.g. PLC programs, Robots, AC/DC Drives are maintained Job Reference #: Maintenance Technician

The individual is tasked with ensuring the smooth operation of production equipment through preventative maintenance, troubleshooting, and repairs. They are expected to work with mechanical, electrical, hydraulic, and pneumatic systems to reduce downtime and maintain productivity. Duties: Modification and analysis of any deviation of machine performance from manufacturers specs. Responsible for identifying and sourcing critical spares for equipment in work area. Maintaining, faultfinding and repair equipment in line with health & safety protocols & standards. Analyse breakdowns and implement preventative measures to eliminate reoccurrences. Conduct routine and non-routine maintenance tasks. Support all maintenance personnel during faultfinding processes in order to improve plant availability and ensure high levels of plant readiness at all times. Ensure that backups of all Critical Operating Files, e.g. PLC programs, Robots, AC/DC Drives are maintained. Requirements: Diploma/Degree in Mechanical, Electrical, Mechatronics Engineering or NN Diploma plus Millwright Trade Three to Five years experience in an Automotive Manufacturing plant within a maintenance environment Essentials Possesses skills on AC and DC control speed drives, preferably SEW and Siemens. Strong programming experience, preferably Siemens Simatic S7/ TIA Portal prerequisite Be able to install and change IP addresses, modify & analyse any deviation of machine performance Knowledge of Siemens Serv1 and 2 Knowledge of Profibus, Interbus and Profine Profisafe, S7 distributed safety. Robotic Knowledge: FANUC, KUKA KRC 2 & 4, Universal Robots Robotic Sealer Application Programming, robot mastering etc. Mechanical Skill: Pumps, Conveyors systems, Lifts Be prepared to work shift, weekends, additional and emergency hours. Ability to communicate effectively at various levels, both verbal and written Strong problem-solving skills

We are currently recruiting for an Electronic Technician to join our team. *Job Purpose* The incumbent is responsible for preventative, corrective and emergency maintenance of electrical and electronic systems of manufacturing equipment and production processes  * Adhere to company safety standards and maintain work practices at all times; * Fault finding, repair and maintenance of production equipment.; * Project work including Electronic/electrical/mechanical related modifications and upgrading of machines. * Regular updating and maintain the electronic records systems of new and backup software. * Maintain the control electronic spares in the department * Manage and control breakdowns to ensure continuous flow of production. * Use problem solving methodologies and tools to solve problems and make continuous improvements through data driven strategies. * Strict adherence to process disciplines. * Be flexible outside of normal working patterns to address issues of urgency. * Work weekday shifts and weekend rotating production and maintenance.  * 100% compliance with safety in terms of ECPL, Pre-Task Analysis (PTA), Job Safety Plans (JSP) and Authority To Commence Work (ATCW). * Deliver tasks autonomously with minimum supervision * 100% PM completion. * Measure and tracking of continuous improvement through MOS. * 100% Support and contribute towards the goals and objectives of SQDCPME * Fault finding and repair of production equipment * Ability to write and make changes in Control Software (PLCs, Vision Systems, Robotics, Servo Systems, Bolting Equipment etc.) * Knowledge of automation systems, variable speed and Servo drives and motors * Reading electrical, pneumatics and hydraulics schematics * Strong knowledge of robotics * Knowledge and experience with problem solving methodologies and tools. * Computer Skills (Excel, Word, and PowerPoint) * Knowledge and experience of Cognex and Basler, ATLAS Copco, Bosch, TPS, ABB, Siemens S7, Siemens and Promess drives and components. * Basic Hydraulics and Pneumatics. * Predictive and planned Maintenance of electrical/ electronic production equipment. * 100% compliance with safety in terms of ECPL, Pre-Task Analysis (PTA), Job Safety Plans (JSP) and Authority To Commence Work (ATCW). * Deliver tasks autonomously with minimum supervision * 100% PM completion. * Measure and tracking of continuous improvement through MOS. * 100% Support and contribute towards the goals and objectives of SQDCPME

We are looking to recruit two Junior software Control Engineers, Your main responsibility is to work on customer projects from design stage, through to providing onsite support to Commissioning Engineers. You will be responsible for the writing of control programmes which utilise PLC, HMI, motion controllers, robotics, servos, hydraulic and pneumatic systems. Requirements: •Bachelor of Engineering in Mechatronics – Qualification and training must be completed (Please attach your statement of results and qualification certificate) •Drivers license •Must have own transport to work and on-site within a 30km radius of home •Familiarisation with Siemens PLC ’s is required •ABB or Yaskawa robotic systems knowledge is desirable •PLC, HMI, Motion Controller programming knowledge •Strong Electrical automation / control system knowledge •Robotic knowledge •Auto CAD electrical or Auto CAD Eplan is an advantage •You will need to be a ‘hands on’ Engineer, fully conversant with modern manufacturing systems •You must be able to work as a team and also unsupervised for extended periods of time Role & Responsibilities: Accept ownership of projects from design to completion •Design and implementation of automation systems •Develop PLC and motion control software •Commission and test control systems and software •Provide written technical reports and other documentation as required by customers. Send CV's to leslee@helloworksa.co.za

We are currently recruiting for an Engineering Specialist Controls to join our team. Job Purpose: Responsible person will be required to develop, implement, monitor and maintain efficient automation controls processes with the use of FIS and other Assembly Line monitoring technology in addition to programming of PLC’s and other equipment to ensure optimum line performance. * Knowledge and understanding of ISO 9000 / ISO 14000 / TS 16949 * Initiates measures to improve equipment performance, methods and quality * Manage all software and hardware installed on different types of continuous process equipment while ensuring minimal down times, proper documentation and version control * Program, Design using PLCs, HMI and SCADA while commissioning and overseeing the installation of equipment * Assists in creating, modifying and revising automation controls instructions and process flow documentation. * Automotive Assembly Process Knowledge And Experience * Ability to read blue prints, AutoCAD, EPlan, interpret and modify electrical schematics * 6 Sigma Certified/Trained * Performs other work-related duties as assigned * Improve Assembly equipment uptime using data analysis and preventative maintenance planning * Develop and implement short, medium and long term improvement plans for implementation within the automated systems. * Take responsibility for investigating and introducing new engineering technologies and strategies. * Undertake root cause analysis and ensure Permanent Corrective Actions (PCA’s) are implemented * Good Behavioral And Leadership Skills * Excellent English Oral and Written communication * Ability To Analyze And Interpret Data Analysis * Good Team Work Ability * Self-Motivated And Results Driven Individual * Read mechanical and electronic schematics to ensure specifications, adherence to standards are met *  Troubleshoot equipment; manage calibration and preventative maintenance processes. * Extensive knowledge of a variety of electronic and digital controls systems and experience to test and writes modifications in multiple languages of systems software (Siemens and Bosch/Rexroth). * Strong understanding of networking, Ethernet, remote IO, ProfiBus and ProfiNet * Fault Finding And Continuous Improvement Execution And Implementation * Engine functionally knowledge beneficial * Improve Assembly equipment uptime using data analysis and preventative maintenance planning * Develop and implement short, medium and long term improvement plans for implementation within the automated systems. * Take responsibility for investigating and introducing new engineering technologies and strategies. * Undertake root cause analysis and ensure Permanent Corrective Actions (PCA’s) are implemented

REQUIREMENTS Perform corrective, preventative and predictive maintenance work according to Company and Industry standard Active participation in projects focused on improvements of machinery and processes Adhere to all health, safety and environment standards and ensure that work is carried out in a safe manner at all times Perform assigned programming tasks Generate the necessary documentation associated with this work and participate in the work of training maintenance personnel and sharing acquired knowledge, whenever required to do so Document anomalies, generate work reports and general status reports of the work assigned daily Request the material resources necessary for the correct performance of the planned maintenance Decides and acts independently in the absence of superiors with regards to the incidents and repairs of the company machines and installations Ad hoc duties as required Qualification/Skills/Experience Required Minimum Electrical /Mechanical Engineering qualification, B-Tech preferred Minimum 5 years Siemens S7 experience, TIA portal, Profibus, WinCC. Allen Bradley will be advantageous. Minimum- 5 years’ experience within a high production demand automotive manufacturing plant Excellent computer knowledge and skills. Fault finding and problem solving. Teamplayer Ideally someone from a system integration background. Willing to work rotating shifts, flexible hours, weekends and during shutdown, if/when required.

An EME company based in Pretoria is looking for a C&I Mechanician for a position based in Mpumalanga Kriel Power Station This personnel must have the following qualifications/certificates all certified: 1. Trade Test 2.N6 and/or National Diploma 3. Siemens Certificate (advantageous) 4. This personnel must have a minimum of 5 years experience on the field. 5. Must have worked at Eskom any of the power stations & knowledge of the plant (will be advantageous) The candidate will be working at Eskom Kriel Power Station at Mpumalanga If you meet the above criteria, kindly forward me your CV's on the below email. Projects@continam.co.za Closing date: 06/07/2021

A position exists with a Global Automotive plant manufacturing company, based in East London. The position advertised is for a Control System Engineer; Minimum Requirements: Mechatronics Engineering Degree Siemens TIA Programming P1 and P2 Knowledge of frequency converters Project Management experience Drivers license Start date: 01.09.2021

Our international client in the automotive sector has a great opportunity for a Maintenance Technician (Mechatronics) to join their Engineering department. Duties: High focus on all production lines Perform assigned maintenance inspections and procedures on machinery Repair breakdowns to machinery PLC programs as assigned Install/relocate/commission machinery and/or production lines as directed in the shortest time possible Evaluate machinery for Continuous Improvements Maintain PLC software for various applications including but not exclusive to: - Welding fixtures- Leak Test units- Checking fixtures- Various production applications- Troubleshooting guides- Improvement initiativesRequirements: Mechatronics qualification (NQF5) 5 years' PLC maintenance experience within an automotive environment Qualified electrician will be an added advantage Extensive hands-on experience in a manufacturing environment including the use of a laptop PC to troubleshoot Pneumatics and hydraulics knowledge PLC Siemens TIA V14 or higher Traceability systems experience Engraving applications experience Camera systems experience Leak test applications experience Job Reference #: PE004294/CT

A vacancy exists for a Project Engineer with our client in the Engineering sector in East London. Skills: Minimum National Diploma Electrical / B.Eng. Mechatronics or equivalent 3-5 Years’ experience in Automation Mechanical, Electronics and Electrical Troubleshooting Strong understanding of Electrical processes Ability to work shifts, weekends and overtime Drivers License and own transport essential   Take on Tasks: PLC Software Systems (Siemens) knowledge Mechanical, Pneumatic & paint related service Technical assistance during production support time (breakdowns) Project planning, installation and commissioning support for installations SECTOR: Engineering & Technical Job Reference #: PE004170/CT

A vacancy exists for a Project Engineer with our client in the Engineering sector - position based in Port Elizabeth/Gqeberha. Skills: Minimum National Diploma Electrical / B.Eng. Mechatronics or equivalent 3-5 Years’ experience in Automation Mechanical, Electronics and Electrical Troubleshooting Strong understanding of Electrical processes Ability to work shifts, weekends and overtime Drivers License and own transport essential   Take on Tasks: PLC Software Systems (Siemens) knowledge Mechanical, Pneumatic & paint related service Technical assistance during production support time (breakdowns) Project planning, installation and commissioning support for installations Job Reference #: PE004171/CT

PLC Automotive Engineer required for leading automotive company based in East London to perform effective planned maintenance and repairs to the whole production machinery and utilities. Responsibilities: PLC Programming and Administration Bar Code Scanner Configuration and Support Torque Tool Configuration and Support Critical Spares Management Comply with OHS Act Regulations and other Legislation Involvement with all new and current projects in various capacities Accurately carry out maintenance schedules for all machinery and services (Electrical and Mechanical) Carry out all works orders given within the time frame given Perform and ensure quality workmanship Speedily rectify breakdowns and after hours call outs Weekly shift and stand by duty to be performed as per roster Keep Plant Engineer up to date pertaining any potential breakdowns and any safety threats Adhere to Company HSEE policy Requirements: National Diploma / BTech Electrical At least 5 years Electrical Engineering experience Siemens S7, TIA Portal, WinCC Pneumatic Knowledge an advantage Robotics Experience an advantage 2 years electrical problem-solving experience Process control experience Attractive package on offer.

Managing and maintaining electronic systems, including fiber optics, IP networks, databases, and machine control software Troubleshooting and resolving PLC system issues (no programming required) to keep machines running seamlessly Handling wiring, equipment installation, and machine calibrationbonus points if you have experience with weighing systems Delivering expert technical support and training to customers, ensuring they maximize the power of automation Taking charge in the fieldsolving on-site challenges with quick thinking and technical expertise Continuously optimizing machine performance, efficiency, and automation processes Communicating technical concepts effectively with customers and colleaguesAfrikaans fluency is essential! Skills & Experience: Proficiency in both spoken and written Afrikaans is essential Solid IT skills paired with a strong background in electronic technology Proven ability to perform accurate machine calibration Knowledge of PLC systems, including Siemens, Rockwell, Schneider, ABB, Honeywell, or other major platforms Qualification: Diploma or Degree in Electrical and/or Electronic Engineering. Valid driver's license. Valid passport (required for international travel). Only South African Residents or individuals with a relevant South African work permit will be considered. Contact MATTHEW LOUW on