Inflatable one man boat

Inflatable cruising kayak for 1 person cruising in calm water for 2 to 3 hours. One raised adult seat for good paddling comfort. Stable and reassuring.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact: Phone/Whatsapp: 062 857 9004 or email: bsapotchefstroom@gmail.com.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

This is a 3 man or 320kg Bush Tec Aqua Marine inflatable Rubberduck in very good condition, it has a electric Elbe waverunner trolling motor with forward and reverse excellent for rivers Cannels or just cruising around this boat has had wood floors and is very easy to deflate and transport around R 11.500 obo

Complete outfit for Trout and Bass fishing. Cadis inflatable U boat with a pair of chest waders size 10. 2 pairs of fins, 1 pairs of bootees. 2 pumps one hand and one electric. Wooden frame landing net. R5500

4 Man Cabin boat for sale. 65 hp Suzuki 3 cylinder 2 stroke motor, no trim and tilt. Suzuki Tank, New bulb. Mechanical winch for anchor, bait bin holder, roll-bar with removable 3 rod holder, rail on front for fishing, canopy, bench at back, handles shortened for seating on the side, LED lights for deck, Night lights for night fishing, USB charger for cellphone, am/fm radio, switches installed for all lights etc, fishfinder, fire extinguisher, 2x oars, Foldable cup holders, New wooden door and console build, curtains inside, cushions excellent condition, removable steps, Plastic battery box, NO battery, No cracks or patches on hull, foam filled, One man operation, Great for first time buyers, COF until Aug2021, Buoyancy done in 2018, trailer not registered and plug needs attention, spare wheel and tyres good condition, winch on front end... Givaway at R20 000...neg.. SERIOUS BUYERS ONLY

Seahawk 4, ntex inflatable Seahawk 4 boat. measuring:351x145x48 cm. supports a maximum weight of:480 kg. capacity for four people. Made from 0.75 mm gauge durable vinyl, with I-Beam inflatable base with ribbed structure and 2 inflatable seats. Comes with 2 aluminium paddles with ribbed surface, measuring 122 cm each which can be turned into one single paddle measuring 244 cm

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. Items Available: 1 Stock ID: SKU: 15258 Contact details: 063 855 5590 (Calls and Whatsapp messages welcome)

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Contact: Email: bsapotchefstroom@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

Our team of camping enthusiasts designed this Air Seconds 4.1 tent for four campers looking for one bedroom and a spacious living area