Gigabit poe unmanaged matrix

Dahua 16 port Gigabit PoE Unmanaged Switch, PoE budget total 190W, 16x RJ-45 10M/100M/1000M (PoE) Overview: PFS3016-16GT-190 16-Port Unmanaged Gigabit PoE Switch Organge port supports 60W Hi-PoE standard Intelligent PoE Plug-and-play Ethernet port supports eight-pin PoE Wide range of working temperature: -10 to +55°C (14°F to +131°F) Full gigabit port design Specifications: Product Code DH-PFS3016-16GT-190 Performance Layer Layer 2 Switching Capacity 32 Gbps Packet Forwarding Rate 23.808 Mpps Packet Buffer Memory 4.1 Mb MAC Table Size 8K Hardware Feature Standard Power Supply Yes PoE Yes Ethernet Port 16 Ethernet Port Rate 1 Gbps Number of Business Card Slots Port 1-port 16: 16 x RJ-45 10M/100M/1000M (PoE) Power Supply 100V AC -240V AC Operating Temperature -10°C to +55°C (14°F to +131°F) Operating Humidity 10%-90% Storage Humidity 5%-95% Power Consumption Idling: 18W Full load: 190W PoE PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE PoE Budget Port 1-port 2 ≤ 60W, port 3-port 16 ≤ 30W, total ≤ 190W PoE Pin Assignment PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) General ESD Air discharge: 8kV Contact discharge: 6kV Thunderproof Common mode: 4kV Differential mode: 2kV Product Dimensions 285 mm x 104.6 mm x 28 mm (11.22″ x 4.12″ x 1.10″) Packaging Dimensions 455 mm x 270 mm x 92 mm (17.91″ x 10.63″ x 3.62″)

Buy D-Link 8-Port Gigabit Poe Unmanaged Desktop Switch; 4X10/100/1000Base-T; 802.3At Poe (DGS-1008PE) for R1,359.00

Buy Cudy 6-Port Ethernet Plus 4-Port Gigabit PoE Unmanaged Switch for R599.00

Buy Cudy 6-Port Ethernet Plus 4-Port Gigabit PoE Unmanaged Switch for R376.48

Buy Vivotek 24x 10/100Mbps PoE + 2x Gigabit combo unmanaged Switch for R6,278.00

The Cudy PE25 2.5Gbps PCI Express Network Adapter is a great way to expand your Desktop PCs network options. It features a high-speed Ethernet port that supports 2.5Gbps speeds over a standard Cat5e or higher cables at distances up to 100m. Whether you use a personal PC or a hosting server, this network adapter gives you the performance you need to get the job done. Its PCI Express 1x slot makes it simple and easy to install on any motherboard that supports PCI-E x1. FEATURES: IEEE802.3bt/IEEE802.3at/IEEE802.3af compliant IP67 waterproof enclosure for outdoor use One gigabit PoE input port and Two-gigabit output PoE ports Extend additional 100 meters for PoE Network Wall-Mount design for any application scenario Plug and play, no additional power supply required SPECIFICATIONS: Chipset: RTL8125 Standards: IEEE 802.3 / IEEE 802.3u / IEEE 802.3ab / IEEE 802.3az / IEEE 802.3bz Network media: 10Base-T,cat3 or above UTP,1000Base-Tx,cat5 or above UTP Data rate: 10/100/1G/2.5Gbps Interface: PCI Express 1x slot Auto MDIX: YES Full Duplex Support: YES MTBF: 376,212 Hours LED Indicator: Link/Act, Speed Port number: 1 x RJ45 Support OS: Windows®10(32/64), Win7 (32/64), Win8,8.1 (32/64) Windows Server® 2012, 2008 LINUX up to 4.15 Product Dimensions: 7.2 x 5 x 0.2 cm WHAT’S IN THE BOX: Cudy PE25 2.5Gbps PCI Express Network Adapter – Black/Red x1

Dahua 10 Port Gigabit Unmanaged Desktop Switch with 8 Port PoE, 8x 10/100/1000 Mbps Base-TX PoE Ethernet Ports, 2x 10/100/1000 Mbps Base-TX Ethernet Ports, 96W whole PoE budget, Port 1 60W PoE budget, Port 2-8 30W PoE budget, 20 Gbps switching capacity Overview: PFS3010-8GT-96 10-Port Gigabit Unmanaged Desktop Switch with 8-Port PoE Intelligent PoE 8-pin assignment PoE power supply Long distance PoE PoE watchdog BT 90W All-giga ports Wide working temperature Specifications: Product Code DH-PFS3010-8GT-96-V2 Service Port Eight 10/100/1000Mbps Base-TX PoE Ethernet ports Two 10/100/1000Mbps Base-TX Ethernet ports Power Supply 48V DC-57V DC Operating Temperature -10°C to + 55°C (-14°F to 131°F) Operating Humidity 10%-90% Power Consumption Idling: 5W Full load: 96W PoE Budget Port 1 ≤ 60W, Port 2-8 ≤ 30W, whole PoE budget ≤ 96W PoE Standard IEEE802.3af, IEEE802.3at, Hi-PoE PoE Pin Assignment PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) Switching Capacity 20 Gbps Packet Forwarding Rate 14.88 Mpps MAC Table Size 4K Jumbo Frame 9216 bytes Communication Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab ESD Air discharge: 8kV Contact discharge: 6kV Thunderproof Common mode: 6kV Differential mode: 4kV Net Weight 0.50 kg (1.1 lb) Gross Weight 1.32 kg (2.91 lb) Product Dimensions 190 mm x 100 mm x 30 mm (7.48″ x 3.94″ x 1.18″)(W x L x H) Packaging Dimensions Packing box: 303 mm x 262 mm x 72 mm (11.92″” x 10.31″” x 2.83″”) Protective box: 549 mm x 325 mm x 397 mm (21.61″” x 12.80″” x 15.63″”)(W x L x H) Package 10 devices in one package Certifications CE: EN60950 FCC

Tenda TEG1124P-24-250W 24-Port Gigabit Ethernet Switch TEG1124P-24-250W is a Tenda Gigabit Ethernet PoE switch that o ers 24 10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-24 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch o ers a maximum PoE power output of 225 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Isolation to help reduce cabling costs of IP terminals like APs and IP cameras 6KV Lightning Protection PoE Switch is the only engineering switch In real projects, APs and cameras are often installed outdoors or at an elevated location, which increases the chance of lightning strikes on cameras and PoE-powered switches. The result is that individual devices are damaged when the outcome is light, and even the whole local area network is damaged. Tenda TEG11 series switches have a professional lightning protection design – 6KV Lightning Protection for Ports and the power, and they have two levels of protection design respectively, which effectively suppress the lightning current from the network cable and power supply, equivalent to adding a security wall to the entire network monitoring system. The test standard is much higher than the national CCCrequest. In the thunderstorm, Tenda TEG11 series switches can also provide a stable and reliable service to the surveillance network and guarantee the normal transmission of the picture. CCTV, Standard, VLAN and Isolation Operation Modes Offered CCTV: in this mode, the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the uplink port of the switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback. Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. VLAN: ports 1 to 22 of TEG1124P-24-250W are isolated from each other, but can communicate with ports 23 and 24 (uplink ports) respectively.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing. Isolation: ports 1 to 12 and Ports 13 to 24 of TEG1124P-24-250W belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. 225W PoE power supply simplified wiring Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras. Specifications Standard b'&' Protocol IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at Indicator 24*Link/Act per device 24*PoE per device 1*Power per device Interface 24 10/100/1000Base-T ports(Data/Power) Lightning Protection 6KV Store b'&' Forward Yes exchange capacity 48 Gbp Packet Forwarding Rate 35.6Mpps RAM Data Buffer 4Mb MAC Address Table 4K PoE supply management Port 1-24 support IEEE802.3at/af PoE standard PoE through pin 1 2 4 5 +/3 6 7 8 – Input Power AC: 100-240V～50/60Hz Dimension 440*178*44mm(W x D x H) Power Consumption in full conguration: b' PoE Max Power Supply: 225W Port Features Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other. VLAN: ports 1 to 22 are isolated from each other, but can communicate with ports 23 and 24(uplink ports) respectively. Isolation: ports 1 to 12 and Ports 13 to 24 belong to two different VLAN. This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Buy Netgear GS316PP Unmanaged Switch Gigabit Ethernet PoE Black GS316PP-100EUS for R5,900.00

Buy Netgear GS108PP Unmanaged Switch Gigabit Ethernet PoE Black GS108PP-100EUS for R3,590.00

Buy TP-Link TL-SG1008MP Unmanaged Network Switch Gigabit Ethernet 10/100/1000 Mbits PoE Black for R2,500.00

Tenda TEF1126P-24-250W Rackmount Switch TEF1126P-24-250W is an unmanaged Network PoE switch independently designed by Tenda. Compliant with IEEE802.3af and IEEE 802.3at standards, it can identify PoE-powered devices intelligently. With a maximum PoE power output of 230 W and 30 W for a single port, it can supply power when transmitting data with APs, IP cameras, and IP phones. The Tenda Network Switch supports 4 working modes, including standard, priority, extend, and VLAN modes, an ideal choice for SMBs, hotels, schools, and factories with video surveillance and wireless networking requirements. GE and SFP Uplink Ports Flexible Networking With Less Breakdown It provides 24*FE+2*GE/1SFP. The 1-24 ports support AF/AT standard PoE power supply mode, which can intelligently identify the power receiving equipment. The Gigabit uplink port can be used for short-distance networking. With one 1000 Mbps combo SFP slot, the Tenda Network Switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fibre module TEG311SM, the switch supports a maximum transmission distance of up to 20km. 4M Large Buffer Guarantees The Surveillance Transmission Stable And Smooth The product has a 4M buffer, which is twice larger than the similars. The maximum output of a single port is 30W, and the whole device is 250W. When used alone, it can provide data transmission and power for 24 PoE IP cameras, APs, etc. Extraordinary quality, favoured by engineering. 6KV Excellent Lightning Protection The switch offers various safety and protection types, including 6 KV lighting protection, PSE short-circuits protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by an inductive thunderstorm. Besides, it supports wide voltage input, AC：100-240V~50/60Hz. 230W High Power Output, Diversified Applications Providing 24 100M PoE ports in accordance with the IEEE802.3AF / AT standard, the maximum PoE output of the whole machine is 230W, and of a single port is 30W. Not afraid of burst traffic, avoid power failure b'&' restart, and it can provide stable power supply and data transmission for HD PoE IP cameras, APs, etc. 4 Modes For More Scenarios, One-key To Change Smart And Easy Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1126P-24-250W be able to deal with different networks, special for small b'&' Medium-sized IP Surveillance b'&' WI-FI coverage project. Up To 250 Meters Long Distance Transmission Under The Extend Mode, Beyond Hundred Meters Transfer Limitation Due to the complex monitoring environment, the distance from each terminal to the monitoring centre is different, some even more than a hundred meters. TEF1126P series can support 250 meters of data transmission in the Extend mode, which can save the cost of your project with fewer devices used. Specifications Standard b'&' Protocol IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at LED 24 * Link/Act LEDs 1 * G1 LED 1 * G2/SFP2 LED 1 * PoE-MAX LED 1 * Power LED Interface 24 * 10/100 Mbps Base-TX RJ45 ports (Data/Power) 1 * 10/100/1000 Mbps Base-T RJ45 ports (Data) 1 * 1000 Mbps Base-X SFP port (Combo) Forwarding Rate 6.55 Mpps Switching Capacity 8.8 Gbps MAC Address Table 16K Lightning Protection ≥6KV Input Voltage AC: 100-240V~50/60Hz PoE Supply Ports 1-24 support standard IEEE802.3af/at 30W output per PoE port 230W output of the total PoE Power Power Consumption 50W output the whole device Dimension 440*178.8*44mm Four Modes Standard: Default mode of the switch. In this mode, it works as an unmanaged switch all ports can communicate with each other separately. Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority ports. All ports can communicate with each other separately. Extend: In this mode, the data rate of ports 17 – 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other. VLAN: In this mode, ports 1 – 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storms and isolate DHCP broadcasts. Environment Operating Temperature: 0℃~45℃ (32℉~113℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification CCC、FCC、CE、RoHS