Dual hexagon weight

Dual hand held Dual Lavalier Dual Headset or any combination of the above Technical Specs Carrier Frequency range: UHF 470-928MHz Stability: ±0.005%(at 25?) Ambient Temperature: 10?±50? Normal Deviation: ±20 KHz Max Deviation: ±75 KHz S/N Ratio: T.H.D: Squelch: Tone control and noise lock dual squelch Frequency Response: 30Hz-20KHz Operating Range: 100m(approximately 300 feet under typical conditions) Receiver Receiving Mode: Quartz Lock Sensitivity: >-107dB Image Rejection: Over 90dB Audio Output: Balanced and Unbalanced Power Requirement: AC 110-120V/220-240V (50-60)External DC 22V 450mA Dimensions(W x D x H): 214 x 150 x 42mm Weight: Approx. 0.5kg Wireless Microphone Cartridge: Dynamic or Condenser Antenna: Built-in RF Output: Spurious Emissions: Normal Deviation: ±20 KHz Maximum Deviation: ±75 KHz Battery: two 1.5V AA battery or 1.2V AA rechargeable battery Battery Life: >8 Hours

Rosin press with dual heating aluminium plates, card printer, label printer, t-shirt printer. Heating plate size = 15cm x 20 cm, Press pressure = 20 ton as specified by manufacturer. Electronic adjustable press time 0 – 999 seconds, electronic adjustable temperature range 0 – 250 degree Celsius, electronic adjustable pressure 0 – 30. This machine is designed for rosin oil extraction or label printing or t-shirt printing with high pressure and temperature. Food grade aluminium dual heated plates. Two individual digital temperature & time LCD & pressure control set, for each heated plate. Heavy duty machine body made from iron, stainless steel and aluminium. For safety, two hand activation and emergency stop. Brand new in original packaging and still under warranty. Also included 1000 units of FDA approved 250 micron rosin bags. Press packaging: Length = 55cm, Width = 38cm, Breadth = 49cm, Weight = 40kg Rosin bags packaging: Length = 20cm, Width = 19cm, Breadth = 29cm, Weight = 2kg

RECEIVER: DUAL CHANNEL FREQUENCY: 735.40MHZ / 670.55MHZ OSCILLATION MODE: QUARTZ CONTROLLED FIXED FREQUENCY AF OUTPUT: 0-300mV S/N RATIO: >90dB SENSITIVITY: 2uV @ SINAD=12dB POWER SUPPLY: DC 12-18V POWER CONSUMPTION: 3WATT OPERATION DISTANCE: 50M (LINE OF SIGHT) WEIGHT: 2KG DIMENSIONS:175X108X40MM TRANSMITTER FREQUENCY STABILITY: POWER OUTPUT: 10mW BATTERY LIFE: 5-7HOURS WEIGHT: 90G DIMENSIONS:105X63X30MM

Dual Channel Wireless System Dual hand held Dual Lavalier Dual Headset or any combination of the above Technical Specs Carrier Frequency range: UHF 470-928MHz Stability: ±0.005%(at 25?) Ambient Temperature: 10?±50? Normal Deviation: ±20 KHz Max Deviation: ±75 KHz S/N Ratio: T.H.D: Squelch: Tone control and noise lock dual squelch Frequency Response: 30Hz-20KHz Operating Range: 100m(approximately 300 feet under typical conditions) Receiver Receiving Mode: Quartz Lock Sensitivity: >-107dB Image Rejection: Over 90dB Audio Output: Balanced and Unbalanced Power Requirement: AC 110-120V/220-240V (50-60)External DC 22V 450mA Dimensions(W x D x H): 214 x 150 x 42mm Weight: Approx. 0.5kg Wireless Microphone Cartridge: Dynamic or Condenser Antenna: Built-in RF Output: Spurious Emissions: Normal Deviation: ±20 KHz Maximum Deviation: ±75 KHz Battery: two 1.5V AA battery or 1.2V AA rechargeable battery Battery Life: >8 Hours

The ultimate home cinema THX ULTRA 7.1 system from this famous Danish speaker manufacturer. (THX Ultra 2 rated) Fantastic build quality (feel the weight of each speaker!) Black/grey finish. In very good condition. D 600 LCR (3 units) / D 600 SUR Left / D 600 SUR Right / D6 SUR Left / D6 SUR Right. With Jamo C80 active subwoofer SPECS:- Type – D 600 LCR (left, center and rear) identical units. System – 3 Way closed Woofer – 2 x6½” / 165 mm Midrange – 2 x 3” / 76 mm Tweeter – 1” / 25 mm DTT Power handling – 200W / 300W Dimensions – 393 x 645 x 229 mm Weight – 13 kg each Type – D 600 SUR (2 identical bi-polar units) System – 3 Way closed dipole Woofer – 1 x6½” / 165 mm Midrange – 2 x 3” / 76 mm Tweeter – 2 x 1” / 25 mm DTT Power handling – 150W / 200W Impedance – 4 ohm Dimensions – 327 x 516 x 221 mm Weight – 9 kg each. Type D6 sur (2 identical bi – polar units) Type Jamo C80 dual 10 inch active subwoofer:- System – Closed box Woofer (mm / in) – 2 x 254 / 10 Amplifier rated output (W) – 1800 Frequency range (Hz) 20 – 200 Cut off frequency (Hz) – Variable Dimensions H x W x D Mm – 447 x 390 x 432 Weight – 25kg RETAIL PRICE 80K MY PRICE 39K Pics from the net.

Ampeg’s GVT52-112 guitar combo is powerful, with a huge range of tones from clean with reverb to tube-soaked gain with attitude. The dual-channel, dual power (50W/25W) design with Baxandall EQ provides true flexibility while 12AX7/6L6 tubes and a 12″ Celestion® speaker deliver pure American tone in a vintage Ampeg look. Straight up tone — GVT52 Dual power modes Full power — 50 watts RMS Half power — 25 watts RMS Dual channels with footswitchable gain boost Ch. 1 — low to moderate gain Ch. 2 — moderate to high gain Preamp: Tube (3 x 12AX7) Rectifier: Solid state Power amp: Tube (2 x 6L6GC) Speaker configuration: 1 x 12″ Celestion Tone controls: Baxandall treble, middle and bass Effects: Spring reverb, footswitchable Speaker outputs: 1 x 16 ohm, 2 x 8 ohm and 2 x 4 ohm Cabinet: Open-back, void-free 15mm plywood Footswitches: GVT-FS1: channel switching / gain boost (included) GVT-FS2: 2-button footswitch for reverb and effects loop on/off (sold separately) Dimensions (H x W x D inches excluding handle approx.): 19.5 x 24.0 x 11.0 Handling weight (approx.): 52.2 lbs / 23.7 kg

Handheld Digital Storage Scope 60MHZ BRAND NEW - NEVER BEEN USED - SURPLUS STOCK - PRICED TO GO! Overview The MT2060 is a combined 60MHz handheld oscilloscope and multimeter specially designed for diagnostic troubleshooting in the field. This compact and reliable instrument is for ultimate performance as it offers a dual channel digital storage oscilloscope with a sample rate of 250MS/s. The colour LCD display with a resolution of 320*240 pixels ensures that waveforms can be read easily, especially when displaying large data or multiple waveforms. The scope offers 2 cursors, memory set up for 4 screens, and a record function of 6kBytes per channel. The True RMS multimeter function offers a digital readout combined with an analogue scale and measures AC and DC Volts, AC and DC Current, Ohms, Continuity, Capacitance and Diode. The MT2060 has independent floating isolated inputs for both the DMM and oscilloscope. The unit is a convenient meter for on-site testing as it is supplied with rechargeable Li-ion batteries that last up to 6 hours. The unit is supplied standard with software and can be interfaced with a PC via a USB cable. Standard accessories include two by 1x10 scope probes, DMM test leads, Capacitance adaptor, DC power supply, all housed in a hard durable carrying case. Features 60MHz Bandwidth 250MS/s Sample rate True RMS DMM 9.5cm TFT colour display with 320 x 240 Pixels, and high resolution Digital Storage Oscilloscope & Multimeter True RMS Multimeter - Volts, Amps, Ohms Continuity Buzzer, Diode Test, Trigger Modes, Free Run, Single Shot, Edge Video Includes 2 pieces by 1x10 probes Dual Independent Floating Isolated Channels (for Multimeter and Between Oscilloscope and Multimeter) Communication to PC via USB Interface, software included Supplied in a hard durable carrying case 6 Hour Capacity Li-ion Rechargeable Battery Light Weight at 645g. Price has been reduced - get it before it goes!

Handheld Digital Storage Scope 60MHZ BRAND NEW - NEVER BEEN USED - SURPLUS STOCK - PRICED TO GO NOW! Overview The MT2060 is a combined 60MHz handheld oscilloscope and multimeter specially designed for diagnostic troubleshooting in the field. This compact and reliable instrument is for ultimate performance as it offers a dual channel digital storage oscilloscope with a sample rate of 250MS/s. The colour LCD display with a resolution of 320*240 pixels ensures that waveforms can be read easily, especially when displaying large data or multiple waveforms. The scope offers 2 cursors, memory set up for 4 screens, and a record function of 6kBytes per channel. The True RMS multimeter function offers a digital readout combined with an analogue scale and measures AC and DC Volts, AC and DC Current, Ohms, Continuity, Capacitance and Diode. The MT2060 has independent floating isolated inputs for both the DMM and oscilloscope. The unit is a convenient meter for on-site testing as it is supplied with rechargeable Li-ion batteries that last up to 6 hours. The unit is supplied standard with software and can be interfaced with a PC via a USB cable. Standard accessories include two by 1x10 scope probes, DMM test leads, Capacitance adaptor, DC power supply, all housed in a hard durable carrying case. Features 60MHz Bandwidth 250MS/s Sample rate True RMS DMM 9.5cm TFT colour display with 320 x 240 Pixels, and high resolution Digital Storage Oscilloscope & Multimeter True RMS Multimeter - Volts, Amps, Ohms Continuity Buzzer, Diode Test, Trigger Modes, Free Run, Single Shot, Edge Video Includes 2 pieces by 1x10 probes Dual Independent Floating Isolated Channels (for Multimeter and Between Oscilloscope and Multimeter) Communication to PC via USB Interface, software included Supplied in a hard durable carrying case 6 Hour Capacity Li-ion Rechargeable Battery Light Weight at 645g. Price has been reduced - get it before it goes!

Klipsch – “keepers of the sound” Absolute monster active sub from these legendary USA manufacturer of high quality speaker equipment. Rare find In very good condition – cherry finish. One active 12 inch front firing subwoofer, with two side firing 12 inch passive radiators. SPECS:- ENCLOSURE TYPE – Bass-reflex via dual rear-firing passive radiators ACTIVE DRIVERS – Ultra-high-excursion 12″ (30.5cm) Cera metallic™ cone, front-firing woofer PASSIVE DRIVERS – Dual ultra-high-excursion 12″ (30.5cm) Cerametallic™ cone, rear-firing passive radiators AMPLIFIER TYPE – BASH® Digital hybrid AMPLIFIER POWER – FTC Rated Power: 800 watts continuous @ b' BANDWIDTH 19–120Hz ± –3dB MAXIMUM OUTPUT – 120dB @ 30Hz 1/8 space, 1m CONTROLS DCS control and feature set with 5 system presets and ARC™ Adaptive Room Correction INPUTS L/R Line-level RCA jacks. USB 2.0 OUTPUTS L/R Line-level RCA jacks (pass thru) FINISH – Cherry WEIGHT – 32.2kg HEIGHT – 47.6cm WIDTH – 61cm DEPTH – 55.2cm Pics from the net.

Enjoy hours of fun with the Cheerson CX-10W CX 10W Mini Pocket Drone. Featuring all the bells and whistles of popular drones on the market today, the Cheerson mini drone is also one of the world’s smallest WiFi FPV drones, and includes altitude hold, WiFi FPV, high quality video/still camera, and a transmitter that doubles as a carrying case. PRODUCT FEATURES: * 4 channel transmitter: Ascend/Descend; Forward/Backward; Left/Right sideward fly; Left/Right rotation. * 6-axis gyro system for stability and ease of operation. * Transmitter & Mobile Phone Dual Operating Mode. * Multi-color LED lights for easy tracking at night. * Super small size. * 0.3MP camera for video and still pictures. * Mobile phone WIFI remote control mode; iOS/Android support. * 3 flying modes: High/Low speed modes and 360-degree high speed rotation mode. * Battery protection module to protect and prevent overcharging the battery. * High density air pressure sensor. * Suitable for indoor flight. * One-touch take off, landing, and return functionality. SPECIFICATIONS: * Diameter of Blade: 30mm (approx 1.1 inch) * Channel: 4CH * GYRO: 6-axis * Quadcopter Battery: 3.7V 150MAH Li Battery (Included) * Transmitter battery: 2 x AAA batteries (Not included) * Flying Time: About 5 mins * R/C Distance: 30-50 meters * WIFI FPV Distance: About 20 meters * Charging Time: about 30 mins * Camera: 0.3MP (Resolution 640X480) * Material: ABSAviation Material * Size Of Product: 42mm x 42mm x 25mm (approx 1.6in x 1.6in x 0.98inch) * Product weight: 17g * Colors: Rose, Gold, or Grey In the box: CX-10W CX quadcopter (with 3.7V 150MAH Li Battery) Spare Blades (4) USB Charging cable Manual Battery explosion-proof http://gotclicks2.com/8EATt5JNC

This power speakers are still like brand new no marks or scratches and used twice for monitors. i have 2off and the price is R3000 for each and have 2 off available with original covers,boxes and package. INPUT SENSITIVITY: MIC -40dBu / LINE 0dBu INPUT IMPEDANCE: Balanced 20k? / Unbalanced 10k? HUM AND NOISE: -90dB MAXIMUM INPUT LEVEL: +20dBu DIMENSIONS (HXWXD): 556mm x 384mm x 312mm / 21.88" x 15.11" x 12.28" EQUALIZATION: HIGH (±10dB) 10KHz Shelving, LOW (±5dB) 100Hz Shelving GROSS WEIGHT (KG / LBS): 15.5kg / 34.1lbs FINISH COLOUR: Black AMPLIFIER PROTECTION: Power switch on/off mute; DC detection; Overload & short-circuit detection; Thermal/Heat sink protection; Output mute/reset LOW FREQUENCY POWER: 250W RMS HIGH FREQUENCY POWER: 50W RMS MONITOR FILTER: A 90Hz HPF Filter for stage monitor use. REMOTE GAIN ATTENUATOR: 3 pin Euroblock connector for remote volume adjustment. POWER AMPLIFIER TYPE: Dual Class D modules (LF and HF).

Specifications Keyboard: 61 Keys with touch respons Sounds: 395 Voices Polyphony: 32 voice Rhythms: 150 Accompaniments wit 2 variations each Rhythm control: Start/Stop, sync, Intro/Ending, Fill A, Fill B Songs: 100 songs, 2 demo’s Sequencer: Record/Play, Start/Stop, Pause, Fast Forward/Rewind General Controls: Master volume, Accompaniment volume, Tempo +/-, Voice, Style, Song, O.T.S., M1 – M6, Dual, Touch, Sustain, Metronome, Demo, Piano, Transpose +/-, Octave +/-, Pitch bend Speakers: 2x 5 watt / 4 ohm Registration memory: 6 Memories for storing presets Learning system: Chord Dictionary, Lesson Function Connections: Adapter 12 volts, Headphones, USB, Sustain, Auxillary Out Dimensions: 986mm (w) x 348mm (d) x 142mm (h) Weight: 6Kg (without batteries) Recommended Power: 12 Volt adapter Type 2

*40% Discount Applied* Print with the best quality. High quality prosumer level high resolution large resin 3D Printer Suitable for professionals, dental, and product prototype production. Imported from Taiwan. Condition: New Technical Specification: Buildsize: 190 * 120 * 200 mm LCD: 8.9″ 2K XY Pixels: 2560*1600 pixels XY Resolution: 75 µm LED Array: ParaLed V2.0 LED Power: 160W Print Speed: Up to 20mm/hour Ports: Network, USB Printer OS: Phrozen OS Slicer: PZ Slicer Z Resolution: 10 – 100 µm Z-axis: Dual Linear Rail with Ball Screw WiFi: Yes Power Input:100-240 VAC – 50/60 HZ Printer size: 39 x 29 x 47cm Printer weight: 22kg

The CTK-700 includes 61 Full-Size keys, 100 Tones, 100 Rhythms, 100 songs, LCD Display, Dual Speakers, Transpose and Tuning Function, MIDI, Microphone Input. •61 full-size keys•12-note polyphony (maximum)•100 tones•Auto-accompaniment (controllers: synchro/fill-in, start/stop)•100 rhythms•MIDI (5-channel multi-timbre receive)•GM simulation mode•Speakers (dia x qty)：10cm x 2•Amplifier：2W + 2W•Comes with song book and music stand•Size (W x D x H): 956 x 355 x 132mm•Weight: 4.0kg•Batteries: AA-size x 6•AC adaptor: AD-5•EAN code: 4971850313083

Shure PG88 Wireless Dual Channel Diversity Receiver Features Up to 8 compatible systems 1/4" and XLR output Internal antenna diversity LED indicates signal strength Specifications Output Impedance: XLR connector: 200 Ohms; 1/4 inch connector: 1kOhms Audio Output Level Reference (±33 kHz deviation with 1 kHz tone): XLR connector (into 100K Ohms load): ”19 dBV, typical; 1/4 inch connector (into 100K Ohms load): ”5 dBV, typical Sensitivity: ”105 dBm for 12 dB SINAD, typical Image Rejection: >50 dB, typical LED Signal Indicator: Green: Normal signal strength; Amber: Strong signal; Red: Peak signal Dimensions (W x D x H): 15.3in. x 4. in. x 1.5 in (368 mm x 116 mm x 40 mm) Weight: 15.1 oz (429 grams) Housing: Molded ABS plastic Power Requirements: 12”18 VDC at 320mA supplied by external power supply