Coax ethernet phone

Buy IgniteNet Outdoor Gigabit Ethernet to Coax Bridge for R2,399.04

Buy Snom D745 12 Line Desktop Phone with Gigabit Ethernet for R3,662.10

Description Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda 10/100Mbps POE Injector Tenda 10/100Mbps POE Injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Features: Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Network standards IEEE802.3、IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100－240V AC 50/60Hz 48V/0.3A DC（Power Adapter Output） Mounting Desktop mounting: support Environment Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC、CE、RoHS b'/xc2/xa0' Why not browse our wide variety of Tenda Products HERE

Tenda PoE injector 15W 10/100 Mbps Features: What It Does – Main Features PoE injector PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port). You can connect to ieee802.3af’s PD, such as wireless AP, IP camera, IP phone, etc. In a sense, reducing installation costs and improving network performance is a good choice. Delivers power and data through one Ethernet cable for easy network extension Compatible with IEEE 802.3af compliant powered devices PoE Port Delivers power up to 100 meters Plug and Play, no configuration required Power Over Ethernet One PoE port to power connected devices for flexible network deployment IEEE 802.3af compliant Compatible with IEEE 802.3af compliant powered devices Extend Power Supply Distance of power transmission via Ethernet cable is up to 100 meters Plug and Play Hassle-free setup, no configuration required Specifications: Product Code POE15F Hardware Network standards IEEE802.3, IEEE802.3u LED Indicator Link/Act, PoE Status Interfaces 1*10/100 Base-TX Ethernet ports(Data/PoE) 1*10/100 Base-TX Ethernet ports(Data) Transmission media Recommended: CAT5/5e UTP or better Dimension 84.5mm*44mm*29.8 mm Level of protection ESD: Air discharge: ±10kV Contact discharge: ±8kV Forwarding mode Store-and-forward Transmission Rate 100Mbps PoE budget Single port: AF: 15.4W Whole device: 15W Power consumption 15W Input voltage 100-240V AC 50/60Hz 48V/0.3A DC(Power Adapter Output) Mounting Desktop mounting: support Environment Operating Temperature: 0°C~45°C Storage Temperature: -40°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Certification FCC, CE, RoHS

NetiX RJ45 Port Doubler 1 x RJ45 plug to 2 x RJ45 jacks, Retail Box, No Warranty Product Overview This RJ45 T adapter is commonly used for converting one single 4-pair connection into two 4-pair connections. Great for phone/fax lines or PBX and data. Features: • One RJ45 8 Position Jack to Two RJ45 8 Position Jacks • Wired Straight Thru - 1-1, 2-2... 8-8 • Increase the number of RJ45 network connections on an RJ45 outlet • Compact design, feel free to enjoy your internet surfing • Convert a single RJ45 outlet to two RJ45 sockets easily, point for more conveniently use • Expand one RJ 45 outlet into two 8 wire RJ-45 T adapter, parallel wiring Specifications • Stock Code 29-0026 • Description RJ45 Port Doubler 1 x RJ45 plug to 2 x RJ45 jacks, • Form Factor RJ45 1x2 Ethernet Connector Splitter • Convert and increase your Ethernet connections from 1 to 2 sockets • Allow two computers to share high speed DSL, cable modem and Ethernet ports • Convert a single RJ45 outlet to two RJ45 sockets easily • Compact design • 8 wire RJ-45T adapter, parallel wiring • Connector: 3 x RJ45 female NOTE: This Ethernet splitter allows two computers to share one Ethernet line ONE AT A TIME, but it doesn't support both computer to connect onto the internet simultaneously

Description Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Tenda PoE30G-AT Gigabit PoE injector The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion but also simplifies the deployment of power lines. Features PoE ports support IEEE802.3at and IEEE802.3af standard Equipped with Gigabit port, blazing-fast transfer rate, the maximum transfer rate of up to 30W for a single port Power distance extension of up to 100 meters for the standard cat. 5e and Cat. 6 Ethernet cable Plug and play, no configuration required PoE Performance PoE ports support IEEE802.3at and IEEE802.3af standard Supports AT high power(30W) Power supply distance extension The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power. Gigabit blazing-fast delivery 10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire-speed forwarding and MDI/MDIX, plug and play. Stable performance Adopts new chips solution, brings new performance experience, powerful data transfer and power Specifications Description PoE Injector Standard b'&' Protocol Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3atStandard CSMA/CD, TCP/IP Features Support the powered devices compatible with IEEE802.3af、IEEE802.3at Standard Transmission range up to 100M Plug and play Port 1 GE port 1 datab'&'power output port supporting PoE Indicator PWR, PoE Dimension 131mm*60mm*33mm Power Output 30W Operation Temperature 0℃~40℃ Storage Temperature -40℃~70℃ Operating Humidity 10%~90% (noncondensing) Storage Humidity 5%~90% (noncondensing)

Description D-Link DAP-1360 N300 Wireless Access Point The D-Link DAP-1360 Wireless N Access Point can provide your wired network with wireless connectivity, or upgrade your existing wireless network and extend its coverage. Enjoy surfing the web, checking e-mail, and chatting with family and friends online, at faster speeds and from previously out-of-reach locations. Features: 1x 10/100 Ethernet LAN Port Wireless speeds up to 300 Mbps 2x Detachable Antennas 7 Operating mode (AP/Wireless-Client/Bridge/Bridge with AP/Repeater/WISP Client/WISP Repeater Seven Operating Modes Flexible configuration options allow it to function as an Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router, or WISP Repeater Total Security Complete set of security features including WEP/WPA/WPA2/WPS to safeguard your network against outside intruders Better Wireless Speed and Coverage Wireless N standard offers higher speeds; up to fourteen times faster than 802.11g, and increased range; up to six times greater than 802.11g Didn’t find the answers you need? Feel free to start a live chat with one of our agents or phone our support line at 012 741 2000 How to set up the device if the WPS function won’t pair? You can set the device up manually by connecting the device directly to a computer or laptop using a LAN cable. Once the device is connected open a web browser (Chrome, Firefox, Internet Explorer etc) and type in http://192.168.0.1 or http://dlinkap in the top bar. Then follow the steps of the setup wizard. I can’t log in to set up the device? Set your laptop/PC on a static IP address in the 192.168.0.x range, and retry logging into the device. If the problem persists reset the DAP-1360 and try again. What is the difference between Repeater and Access Point? Repeater mode will connect wirelessly and extend the network further, while access point mode requires a cable connection from the main router to the DAP-1360. Fast and Reliable Wireless Connectivity An 802.11n compliant device, the DAP-1360 delivers up to 14x faster speeds and 6x farther range1 than 802.11g while retaining backward compatibility with 802.11g and 802.11b devices. Multiple Operation Modes The DAP-1360 offers seven modes of operation, namely Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router, and WISP Repeater (Range Extender) Mode. These modes allow you to flexibly configure the device for use with different wireless applications. Access Point Mode allows the device to act as a central hub for wireless users. Wireless Client Mode enables the DAP-1360 to connect to another access point. Bridge Mode can join two wired networks together, while Bridge with AP Mode allows the device to act as a wireless hub and a bridge at the same time. Repeater Mode extends wireless coverage to cover all “dead” spots. WISP Client Router Mode allows wireless Internet service subscribers to share Internet connection with home/office Ethernet-enabled computers without the need for an extra router. Finally, the device can act as a WISP Repeater (Range Extender) to let WISP subscribers share their Internet connection with wired and wireless computers without any extra routers. Quick and Easy Installation With the D-Link setup wizard, you can set up your wireless network in minutes. It configures your DAP-1360’s operating mode and makes it easy to add new wireless devices to the network. Create a simple wireless network for your home or office quickly and easily with the DAP-1360. Specifications: General Network Standards 802.11n wireless LAN 802.11g wireless LAN 802.11b wireless LAN 802.3/802.3u 10BASE-T/100BASE-TX Ethernet ANSI/IEEE 802.3 NWay auto-negotiation Device Interfaces 802.11n/g/b wireless LAN One 10/100BASE-TX Ethernet LAN port Operating Frequency 2.4 to 2.4835 GHz Operating Channels FCC: 11 ETSI: 13 Radio b'&' Modulation Schemes DQPSK, DBPSK, CCK, OFDM Functionality Operating Modes Access Point Wireless Client Bridge Bridge with AP Repeater (Range Extender) WISP Client Router WISP Repeater Antennas Two 5 dBi Gain detachable Omni-directional antennas with RP-SMA connector Security 64/128-bit WEP data encryption WPA-PSK, WPA2-PSK WPA-EAP, WPA2-EAP TKIP, AES MAC address filtering SSID broadcast disable function WPS (Wi-Fi Protected Setup) Advanced Features Quality of Service (QoS): Wi-Fi Multimedia (WMM) Device Management Web-based management through Microsoft Internet Explorer 6 or higher, Firefox 3.0 or higher, or other Java-enabled browser Status LEDs Power Wireless Security LAN Physical Dimensions 147.5 x 113 x 31.5 mm (5.81 x 4.45 x 1.24 inches) Weight 185.7 grams (6.55 ounces) Power Input 12 V DC/0.5 A external power adapter Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 65 °C (-4 to 149 °F) Humidity Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing Certifications FCC Class B CE IC C-Tick Wi-Fi Certified

D-Link DAP-1360 N300 Wireless Access Point The D-Link DAP-1360 Wireless N Access Point can provide your wired network with wireless connectivity, or upgrade your existing wireless network and extend its coverage. Enjoy surfing the web, checking e-mail, and chatting with family and friends online, at faster speeds and from previously out-of-reach locations. Features: 1x 10/100 Ethernet LAN Port Wireless speeds up to 300 Mbps 2x Detachable Antennas 7 Operating mode (AP/Wireless-Client/Bridge/Bridge with AP/Repeater/WISP Client/WISP Repeater Seven Operating Modes Flexible configuration options allow it to function as an Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router, or WISP Repeater Total Security Complete set of security features including WEP/WPA/WPA2/WPS to safeguard your network against outside intruders Better Wireless Speed and Coverage Wireless N standard offers higher speeds; up to fourteen times faster than 802.11g, and increased range; up to six times greater than 802.11g Didn’t find the answers you need? Feel free to start a live chat with one of our agents or phone our support line at 012 741 2000 How to set up the device if the WPS function won’t pair? You can set the device up manually by connecting the device directly to a computer or laptop using a LAN cable. Once the device is connected open a web browser (Chrome, Firefox, Internet Explorer etc) and type in http://192.168.0.1 or http://dlinkap in the top bar. Then follow the steps of the setup wizard. I can’t log in to set up the device? Set your laptop/PC on a static IP address in the 192.168.0.x range, and retry logging into the device. If the problem persists reset the DAP-1360 and try again. What is the difference between Repeater and Access Point? Repeater mode will connect wirelessly and extend the network further, while access point mode requires a cable connection from the main router to the DAP-1360. Fast and Reliable Wireless Connectivity An 802.11n compliant device, the DAP-1360 delivers up to 14x faster speeds and 6x farther range1 than 802.11g while retaining backward compatibility with 802.11g and 802.11b devices. Multiple Operation Modes The DAP-1360 offers seven modes of operation, namely Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router, and WISP Repeater (Range Extender) Mode. These modes allow you to flexibly configure the device for use with different wireless applications. Access Point Mode allows the device to act as a central hub for wireless users. Wireless Client Mode enables the DAP-1360 to connect to another access point. Bridge Mode can join two wired networks together, while Bridge with AP Mode allows the device to act as a wireless hub and a bridge at the same time. Repeater Mode extends wireless coverage to cover all “dead” spots. WISP Client Router Mode allows wireless Internet service subscribers to share Internet connection with home/office Ethernet-enabled computers without the need for an extra router. Finally, the device can act as a WISP Repeater (Range Extender) to let WISP subscribers share their Internet connection with wired and wireless computers without any extra routers. Quick and Easy Installation With the D-Link setup wizard, you can set up your wireless network in minutes. It configures your DAP-1360’s operating mode and makes it easy to add new wireless devices to the network. Create a simple wireless network for your home or office quickly and easily with the DAP-1360. Specifications: General Network Standards 802.11n wireless LAN 802.11g wireless LAN 802.11b wireless LAN 802.3/802.3u 10BASE-T/100BASE-TX Ethernet ANSI/IEEE 802.3 NWay auto-negotiation Device Interfaces 802.11n/g/b wireless LAN One 10/100BASE-TX Ethernet LAN port Operating Frequency 2.4 to 2.4835 GHz Operating Channels FCC: 11 ETSI: 13 Radio b'&' Modulation Schemes DQPSK, DBPSK, CCK, OFDM Functionality Operating Modes Access Point Wireless Client Bridge Bridge with AP Repeater (Range Extender) WISP Client Router WISP Repeater Antennas Two 5 dBi Gain detachable Omni-directional antennas with RP-SMA connector Security 64/128-bit WEP data encryption WPA-PSK, WPA2-PSK WPA-EAP, WPA2-EAP TKIP, AES MAC address filtering SSID broadcast disable function WPS (Wi-Fi Protected Setup) Advanced Features Quality of Service (QoS): Wi-Fi Multimedia (WMM) Device Management Web-based management through Microsoft Internet Explorer 6 or higher, Firefox 3.0 or higher, or other Java-enabled browser Status LEDs Power Wireless Security LAN Physical Dimensions 147.5 x 113 x 31.5 mm (5.81 x 4.45 x 1.24 inches) Weight 185.7 grams (6.55 ounces) Power Input 12 V DC/0.5 A external power adapter Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 65 °C (-4 to 149 °F) Humidity Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing Certifications FCC Class B CE IC C-Tick Wi-Fi Certified

TP-Link Deco M5 AC1300 Whole Home Mesh Wi-Fi System *Note: The Deco Ethernet backhaul feature is based on the standard IEEE 1905.1 protocol. Please use swicthes that supports IEEE 1905.1 Overview: Deco is the simplest way to guarantee a strong Wi-Fi signal in every corner of your home. Enjoy fast, stable connections for an army of devices in homes up to 5500 square feet (3-pack) / 3800 square feet (2-pack). Setup couldn’t be easier with the Deco app there to walk you through every step. Features: Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all! With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds. A Deco M5 three-pack delivers Wi-Fi to an area of up to 5500 square feet, while a Deco M5 two-pack delivers up to 3800 square feet. And if that’s not enough, simply add more Decos to the network anytime to increase coverage. Deco M5 provides fast and stable connections with speeds of up to 1267Mbps and works with any internet service provider (ISP) and modem. Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices. TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS). Setup is easier than ever with the Deco app there to walk you through every step. Dead-Zone Killer Eliminate weak signal areas with whole-home Wi-Fi. No more searching around for a stable connection. Want more coverage? Simply add another Deco. No More Buffering Tired of endless loading? With an ever increasing number of bandwidth-hungry gadgets in our homes, you need a network that can rise to the challenge. With network speeds three times faster than the previous generation routers thanks to 802.11ac wireless technology, Deco can provide lag-free connections for over 100 devices. Seamless Roaming Decos work together to form one unified Wi-Fi network. Your phone or tablet will automatically connect to the Deco that provides the fastest speeds as you move through your home, creating a truly seamless online experience. Setup Just Got a Lot Easier Unbox Deco, install the app and then simply follow the on-screen directions. Deco will take care of the rest, getting your network up and running in minutes. TP-Link HomeCare TP-Link HomeCare ensures every device on your network remains protected, with a threat database updated live by Trend Micro. Powerful parental controls can limit online time and block inappropriate content according to unique profiles created for each family member. Specifications: Product Code NET-TL-DECO-M5-2PK POWER AC adapter input 100-240V ~ 50/60Hz 0.4A AC adapter output 12V / 1.2A HARDWARE FEATURES Processor Quad-core CPU Interface 2 LAN/WAN Gigabit Ethernet Ports Button 1 Reset button on the underside External Power Supply 12 V/1.2 A Flash 32 MB SDRAM 256 MB Dimensions Ø4.7 in. x 1.3 in. (Ø120 mm x 38 mm) Antenna 4 internal antennas per Deco unit Bluetooth version 4.2 and above WIRELESS FEATURES Wireless Standards IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency 2.4 GHz and 5 GHz Signal Rate 400 Mbps on 2.4 GHz 867 Mbps on 5 GHz Transmit Power FCC: b' CE: b' b' Wireless Security WPA-PSK/WPA2-PSK Advanced Functions TP-Link Mesh Technology: MU-MIMO Auto Path Selection AP Steering Band Steering Beamforming SOFTWARE FEATURES Quality of Service WMM IPv6 Support WAN Type Dynamic IP/Static IP/PPPoE Management Local Management, Remote Management DHCP Server, Client Port Forwarding Support Access Control Blacklist Firewall Security SPI Firewall Protocols Supports IPv4 and IPv6 Advanced Features Homecare: Antivirus Parental Controls Quality of Service Advanced Functions Speedtest Monthly Usage Reports Auto FW Update Expand for more deco Guest Network 2.4 GHz guest network * 1 5 GHz guest network * 1 Beamforming Support APP Easy setup by Deco App OTHERS Certification CE, FCC, IC, NCC, BSMI, IDA Package Contents Deco M5 (-pack): 2 Deco units 1 RJ45 Ethernet Cable 2 Power Adapters Smartphone/Tablet Requirements iOS 8.0 or later Android 4.3 or later Bluetooth 4.0 or later Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

Description TP-Link RE305 AC1200 WiFi Range Extender Tired of Wi-Fi dead zones in your home? The TP-Link AC1200 WiFi Range Extender connects to your Wi-Fi router wirelessly. Strengthening and expanding its signal into areas it can’t reach on its own while reducing signal interference. To ensure reliable Wi-Fi coverage throughout your home or office. High-Speed Dual Band Wi-Fi for Better Connections The RE305 lets you keep more devices* connected at the same time with its 2.4GHz 300Mbps and 5GHz 867Mbps dual bands. Use the 2.4GHz band to send an email and browse the web, and the 5GHz band for gaming and HD streaming. Perfect Location at a Glimpse An Intelligent Signal light helps you quickly find the best location to install the RE305. Built-in Access Point Mode RE305 is more than a wireless range extender. Simply plug the Ethernet cable into its Ethernet port to easily turn your wired internet connection into a dual-band wireless access point. Easy Management and Remote Control The RE305 works with all Wi-Fi routers. You can use TP-Link’s free Tether app to set up the range extender from any Android or iOS device in minutes. This feature-rich phone app allows you to enjoy not only hassle-free installation but also access to advanced network management, all at your fingertips. b'/xc2/xa0' Looking for other networking products? Browse our networking range here

TP-Link RE305 AC1200 WiFi Range Extender Tired of Wi-Fi dead zones in your home? The TP-Link AC1200 WiFi Range Extender connects to your Wi-Fi router wirelessly. Strengthening and expanding its signal into areas it can’t reach on its own while reducing signal interference. To ensure reliable Wi-Fi coverage throughout your home or office. High-Speed Dual Band Wi-Fi for Better Connections The RE305 lets you keep more devices* connected at the same time with its 2.4GHz 300Mbps and 5GHz 867Mbps dual bands. Use the 2.4GHz band to send an email and browse the web, and the 5GHz band for gaming and HD streaming. Perfect Location at a Glimpse An Intelligent Signal light helps you quickly find the best location to install the RE305. Built-in Access Point Mode RE305 is more than a wireless range extender. Simply plug the Ethernet cable into its Ethernet port to easily turn your wired internet connection into a dual-band wireless access point. Easy Management and Remote Control The RE305 works with all Wi-Fi routers. You can use TP-Link’s free Tether app to set up the range extender from any Android or iOS device in minutes. This feature-rich phone app allows you to enjoy not only hassle-free installation but also access to advanced network management, all at your fingertips. b'/xc2/xa0' Looking for other networking products? Browse our networking range here

We do computer network cable installations. This includes network cabling for your home, office, or business. We do chasing in walls, conduit, drywall and surface mounted installations. VOIP, voice cabling, computer network cabling and video cabling Installations of cables within roofs, walls and under floors Installation and setup of new networks Upgrades or improvements of existing networks Power over Ethernet (POE) for cameras, VOIP phones, cash registers, scales etc, should your equipment require it Provision of network equipment and peripherals such as routers, switches and server cabinets Set up of servers and server rooms with ventilation fans Repairs to networks and cabling Rack installations We can do basic point to point installations, or more advanced topologies. Whether your requirements pertain to new or existing network infrastructures, we are available to assist with the planning, design and installation of your cabling system. We can assist if you are moving into a new building, relocating offices to an existing building or rearranging or expanding your current network. We are available to connect your computers to a UPS, if required. We offer a complete service (turnkey solution), should you require it. Supply and delivery of material, complete product installations, construction work, finishing touches (including plastering and painting), clean-up and rubble removal afterwards. We are an environmentally friendly business. We safely discard of old electronic equipment, if required. We service the Greater Johannesburg area. For more information or a quotation, please contact us. Contact: Tom le Grange Cell Phone / WhatsApp: 084 502 4164 Email: legrange.tom@gmail.com

We do computer network cable and Wi-Fi installations. This includes network cabling and Wi-Fi for your home, office, or business. We do chasing in walls, conduit, drywall and surface mounted installations, if required: Wi-Fi and range extender installations Security cameras and video surveillance systems VOIP, voice cabling, computer network cabling and video cabling Upgrades or improvements of existing networks Power over Ethernet (POE) for cameras, VOIP phones, cash registers, scales etc, should your equipment require it Provision of network equipment and peripherals such as Wi-Fi routers, switches and server cabinets Set up of servers and server rooms with ventilation (cooling) fans Installations of cables within roofs, walls and under floors Installation and set-up of new networks Repairs to networks and cabling Rack installations We can do basic point to point installations, or more advanced installations. Whether your requirements pertain to new or existing network infrastructures, we are available to assist with the planning, design and installation of your Wi-Fi or cabling system. We can assist if you are moving into a new building, relocating offices to an existing building or rearranging or expanding your current network. We are available to connect your computers to a UPS, if required. We offer a complete service (turnkey solution), should you require it. Supply and delivery of material, complete product installations, construction work, finishing touches (including plastering and painting), clean-up and rubble removal afterwards. We service the Greater Johannesburg area (including Sandton, Randburg, Roodepoort, Bedfordview, Alberton, Edenvale and surrounding areas). We are available to do subcontract work. For more information or a quotation, please contact us. Contact: Tom le Grange Cell Phone / WhatsApp: 084 502 4164 Email: legrange.tom@gmail.com