Brush hog s

The Big Softy is our soft wash brush that’s suitable for use all over the bike but particularly effective on frames, wheels, bars, saddles/posts and anywhere else you fancy. The Softy has a big head on it to make light work of cleaning larger areas fast. The Angled head makes it a doddle to use whilst the rubberised impact zones help to prevent any unwanted knocks or scrapes. Key Features Large brush head. Soft bristle tips. Tough impact resistant rubberised handle and impact zones. Dual density handle for maximum grip. Angled head for easy use. Ideal for cleaning larger areas. Helps to create a foam with bike cleaner. Directions for Use Get bike wet with hose, apply bike cleaner and get to work. Cleaner can also be applied directly to the brush head for some extra cleaning power and coverage. Always rinse brush with fresh water after use. As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits we’d recommend a sponge or microfibre cloth. To maintain performance of all brushes avoid using them with boiling water or on any hot parts. If bristles lose their shape, placing the brush in hot water (80-100°C) for 10-30 seconds and giving it a quick shake once removed will restore the shape to the brush head.

Our horse riding designers developed this hoof pick for picking and cleaning your horse's hooves.Perfect for removing mud, manure, stones. Small brush to finish cleaning hooves before greasing them up!

Buy 12 Pcs Tableware Set Silicone Wooden Handle Flatware Spoon Tongs Whisk Brush with S... (COLOR: PINK) for R1,043.00

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. Items Available: 1 Stock ID: SKU: 15258 Contact details: 063 855 5590 (Calls and Whatsapp messages welcome)

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Contact: Email: bsapotchefstroom@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact: Phone/Whatsapp: 062 857 9004 or email: bsapotchefstroom@gmail.com.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

Cleaner + Brush + Microfibre Cloth SNEAKERRAP’s Cleaner contains four different surfactants (foaming agents) which all function by breaking down the interface between water and oils and/or dirt. They hold these oils and dirt in suspension (the foam you see) and allow their removal. Although these surfactants have the s

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. GUARANTEE PERIOD: Six (6) months guarantee is provided from date of purchase. T&C's apply. SKU: 15261 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. Items Available: 5 Stock ID: SKU: 15258 For more information on this product please contact me on: Mobile: 063 925 9920 (call or whatsapp) Email: herman@boatssa.com Website: www.boatssa.com

Chain Cleaner for all types of bikes. cleaner clips directly to the chain without removing the chain from the bicycle and use the chain brush cleaner to wash chain quickly and easily. can also be viewed in Durban North by arrangement. courier with PostNet or Courier Guy at buyer’s cost. buyer to share cost, if using Bikehub Pay.