Boat water marine cover

water proof cover, mp3 player and speakers with antenna R1200.00NEG 0724618239

Buy 16x58cm Boat Water Sport Boating Tools Inflatable Boat Marine Buffers Mooring... for R589.00

Buy 16x58cm Boat Water Sport Boating Tools Inflatable Boat Marine Buffers Mooring for R546.20

Buy 16x58cm Boat Water Sport Boating Tools Inflatable Boat Marine Buffers Mooring for R669.99

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact: Phone/Whatsapp: 062 857 9004 or email: bsapotchefstroom@gmail.com.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. SKU: 15261 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Our foam sheet is made from premium EVA resin, and the two layer is bonded not glued, it won’t come apart even in temperature up to 70 degrees Celsius Safety: We make them nonslip to make sure you can stand and walk safely on your boat. Meanwhile the material is also Eco-friendly and no harmful to human compared to PVC. Comfortable: it is softer than other marine flooring mat materials. Unlike wood or fiberglass, it is always an enjoy when you stand on it no matter in the heat or cold. Durable: Our marine flooring mat is able to handle harsh weather, wind, rain, pooling water. Easy installation and cleaning: The adhesive back side make installation so easy; you can install them by yourself. And it is also easy to clean just like clean your boat deck using water and soap. 2 colours avail as per pics Teak Brown with black lines Grey with Black Lines 2.4m x 1.2m 6mm thick

PLEASE WHATSAPP OR EMAIL ALL INQUIRIES TO 0828320752 AND HUGOPTA@GMAIL.COM, CALLS ARE NOT ALWAYS POSSIBLE FOR ME. All of that in 1 single socket and they are compatible with any 12 volt application. They are cast aluminum and are weather and water protected by a marine cover that still shows you the volt reading when the cover is on the socket. They come pre wired with 1m wire and shrink. Whatsapp on +27828320752, postage available anywhere.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. Items Available: 1 Stock ID: SKU: 15258 Contact details: 063 855 5590 (Calls and Whatsapp messages welcome)

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Contact: Email: bsapotchefstroom@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: – Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover – Drape the cover over the entire boat, starting at the bow – Pull the cover over the rub rail around the entire boat – Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover – Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat – When you finish fasten with a knot the two ends of the nylon rope – Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer – Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: – To keep the cover clean and protected when not in use a storage bag is included. – To extend the products’ life clean it with a soft bristle brush and lukewarm water. – NEVER use soap as it may damage the protective coating of the cover. – ALWAYS leave to dry completely before storing it. Guarantee period: Six (6) months guarantee is provided from date of purchase. T&C’s apply. SKU: 15261 Please contact/WhatsApp Sabia for more information on 0783384949 or email to sabia@boatssa.co.za

Buy 11-22ft Barco Boat Cover Anti-UV Waterproof Heavy Duty 210D Marine Protector Trailerab... (TYPE: #3) for R2,403.59

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. GUARANTEE PERIOD: Six (6) months guarantee is provided from date of purchase. T&C's apply. SKU: 15261 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com