Boat cleaning set

The cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle. The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking. The brushes and hooks are made of thread, in order to be fitted to the handle. The telescopic handle is 110cm long and can extend up to 200cm, so that you can adjust it accordingly. It is made of anodised aluminium for more durability and longevity. Designed according to your needs, for your own convenience. SKU: 19658 Contact: Phone/Whatsapp: 063 439 0617 or email: bsapotchefstroom@gmail.com

The cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle. The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking. The brushes and hooks are made of thread, in order to be fitted to the handle. The telescopic handle is 110cm long and can extend up to 200cm, so that you can adjust it accordingly. It is made of anodised aluminium for more durability and longevity. Designed according to your needs, for your own convenience. SKU: 19658 Contact: Email: bsapotchefstroom@gmail.com

CONTACT/WHATSAPP US ON 078 338 4949 The cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle. The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking.

Contact ETIENNE on 073 409 4629 (Or Whats App) The cleaning set consists of one wash brush, one scrub brush, one hook and one telescopic handle. The boat brushes are used for gentle or hard cleaning respectively. They are made of polypropylene body and PVC bristles to resist better against the salt and the sun. The nylon hook is light, with small length and large angle for easier and better hooking.

Buy FESTOOL Cleaning Set For Tradesmen D 36 Hw-Rs-Plus 497700 for R7,038.90

Buy FESTOOL Floor Cleaning Set D 36 Bd 370 Rs-Plus 497699 for R6,488.90

Buy FESTOOL Office Cleaning Set D 36 Bu-Rs 767987 for R4,680.50

Buy FESTOOL Masonry Renovation Cleaning Set D 36 Rs-M-Plus 497698 for R4,378.00

Buy FESTOOL Cleaning Set For Industrial Use D 50 Gs-Rs 454770 for R2,788.50

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact: Phone/Whatsapp: 062 857 9004 or email: bsapotchefstroom@gmail.com.

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 488-564 cm (L) x 239 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. Fitting Instructions: * Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover * Drape the cover over the entire boat, starting at the bow * Pull the cover over the rub rail around the entire boat * Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover * Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat * When you finish fasten with a knot the two ends of the nylon rope * Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer * Do the same with the second stretching cord on the other side of the boat Maintenance and Cleaning: * To keep the cover clean and protected when not in use a storage bag is included. * To extend the products’ life clean it with a soft bristle brush and lukewarm water. * NEVER use soap as it may damage the protective coating of the cover. * ALWAYS leave to dry completely before storing it. SKU: 15258 Contact Us on 061 935 3537 or email: bsajohannesburg@gmail.com

Ideal to cover and protect your boat against rain, dust and sun. High construction standards with high quality materials. Strong PA coated polyester 300D. * Size: 518-579 cm (L) x 244 cm (W) This Boat Cover is ideal for protecting your boat against all the elements. Made for dinghies it can also be used on fishing or recreational boats, inflatable or motor boats with or without cockpit and rails. Made from extra strong PA-Coated Polyester 420D they provide maximum water resistance and are available in silver. All sizes feature an all-around elastic cord for a perfect fit and have double stitched seams for long-lasting use. Additionally, they have non-scratching plastic D-rings for extra hull protection while fixing. A storage bag is provided to keep your boat cover clean and protected when not in use. If it should need cleaning, use a soft bristle brush and lukewarm water. Do not use soap as it may damage the protective coating. Always let it dry completely before storing. SKU: 15261 Please contact (or whatsapp) me on 062 857 9004 or email to bsapotchefstroom@gmail.com for more details regarding this product.

Our foam sheet is made from premium EVA resin, and the two layer is bonded not glued, it won’t come apart even in temperature up to 70 degrees Celsius Safety: We make them nonslip to make sure you can stand and walk safely on your boat. Meanwhile the material is also Eco-friendly and no harmful to human compared to PVC. Comfortable: it is softer than other marine flooring mat materials. Unlike wood or fiberglass, it is always an enjoy when you stand on it no matter in the heat or cold. Durable: Our marine flooring mat is able to handle harsh weather, wind, rain, pooling water. Easy installation and cleaning: The adhesive back side make installation so easy; you can install them by yourself. And it is also easy to clean just like clean your boat deck using water and soap. 2 colours avail as per pics Teak Brown with black lines Grey with Black Lines 2.4m x 1.2m 6mm thick

Set includes: Beach bag  with zip 51cm beach ball Arm bands Beach boat Age: 3-6 This item is dependent on availability from our suppliers