Argb fan mid tower case form factor

GALAX STARTER GAMING BUNDLE – GALB Sonar 1 Headset PR-02 REV 01 Case GALAXY SONAR 1 GAMING HEADSET 7.1 RGB – G-HGS015USRGR0-GXLG GALAX Gaming Headset (SNR-01) USB 7.1 Channel RGB SPECIFICATION Impedance:16ohm+/-15% Frequency:20-20000Hz Mic Sensitivity: -35dB+/-3db Directivity: Omni-directional Cable Length:2.0m Connector: USB 2.0 (Virtual 7.1 with Software for RGB) GALAX PRISMA-02 Monitor (PR-02) 27″ FHD / VA / 75Hz / G-Sync Compatible / Borderless / USB-C Supported Display Screen Size: 27 Backlight Type: LED Panel Type: VA Aspect Ratio: 16:9 Native Resolution: 1920 X 1080 @ 75 Hz Contrast Ratio (max): 3000:1 Brightness (max): 250 cd/m² Response Time (max): 8ms G2G Viewing Angle (Horizontal/Vertical): 178º/178º (CRb'>'10) Display Colors: 16.7M, 8Bit, 72% NTSC GALAXY REVOLUTION 01 GAMING CASE – G-CG01AGBA4AO-GXLG GALAX PC Case (REV-01) ATX, 4 ARGB FAN MID Tower Case Form Factor (Midi, Micro, Mini ITX, Full): MIDI Chassis: SPCC: 0.45mm PSU Form Factor: Bottom/ATX M/B Form Factor: ATX, M-ATX Add 3PINTO3

The MSI MAG FORGE M100A m-ATX ARGB Gaming Chassis features a front mesh panel that allows air to flow into the case easily without obstruction, providing the best system cooling performance. The micro-ATX chassis provide a small footprint but big performance. You don’t need to worry about system cooling thanks to the help of the gaming chassis’ mesh front design. The gaming chassis offers extensive support for the installation of all your hardware components. A magnetic filter sits on the top vents keeping dust from falling inside while being easily removed for cleaning. FEATURES: Can install up to 6x system fans, providing ventilation and stable performance to the whole system. Built-in Auto RGB fans with striking lighting and vivid lighting effects. The magnetic filter on the top vents can be easily removed for cleaning. Support up to 300 mm graphics card Front mesh design for great airflow SPECIFICATIONS: Form Factor: Micro-ATX Tower Motherboard Form Factor Support: Micro-ATX/Mini-ITX I/O Ports: 2x USB 2.0 Type-A, 1x USB 3.2 Gen 1 Type-A, 1x Audio, 1x Mic Drive Mount Support: 2x 2.5”, 1x 2.5” / 3.5”, 1x 3.5” Expansion Slots: 4 Maximum GPU Length: 300 mm Maximum CPU Cooler Height: 160 mm Power Supply Support: ATX Fan Size Support: Front: 3 x 120 mm, Top: 2 x 120 mm, Rear: 1 x 120 mm Pre-Installed Fan Size: Front: 3 x 120 mm, Rear: 1 x 120 mm Pre-Installed Fan Type: Front: 3 x Auto-RGB Fan, Rear: 1 x Auto-RGB Fan Radiator Size Support: Front: 120/240 mm, Top: 120/240 mm, Rear: 120 mm Product Dimensions: 38.8 x 20 x 42.3 cm Product Weight: 3360g WHAT’S IN THE BOX: MSI MAG FORGE M100A m-ATX ARGB Gaming Chassis x1

Antec AX81 Elite Mid-Tower ATX Gaming case Features: Unique Design b'&' Powerful Heat Dissipation The AX81 Elite features a unique design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 8 x 120mm fans can be installed simultaneously. Massive Minimalist Mesh Front Panel The minimalist case design ensures massive airflow or maximum cooling performance and enhances dust prevention at the same time. High-Airflow Front Panel Large-area mesh front panel for massive airflow. Pre-Installed 4 x 120mm ARGB fans Pull in massive air for cooling. In Sync with Motherboard for ARGB Lighting The built-in control hub can sync with the motherboard or switch the ARGB lighting modes with the ARGB control button for your personalized setup. Neat Build within Reach 24mm space for cable management ensures your PC build looks neat. Tempered Glass Side Panel Showcase your personalized hardware and custom water-cooling system. Up to 8 x 120mm Fans Simultaneously Compatibility Unlimited Performance Max. GPU Length: 340mm Dimensions 421 x 210 x 485 mm (DWH) Specifications: Product Code AX81 ELITE main spec Dimensions 421 x 210 x 485mm(DWH) Form Factor Mid Tower Materials Steel+Plastic Mainboard Support E-ATX(≤272mm), ATX, Micro-ATX, ITX Front Access b'&' Controls Power, Reset, LED Control Button, 2 x USB 2.0, 1 x USB 3.0, Headphone / Mic Combo Jack Side Panel 4MM Tempered glass Drive Bays Expansion Slots 7 3.5″ / 2.5″ 2/1 2.5″ 2 Fan Support Front 3 x 120mm / 3 x 140mm Top 2 x 120mm / 2 x 140mm Power supply 2 x 120mm Rear 1 x 120mm Included Fan(s) 3 x 120mm ARGB fans in front + 1x 120mm ARGB fan in rear Radiator Support Front 120 / 140 / 240 / 280 / 360mm Top 120 / 140 / 240 / 280mm Rear 120mm Clearance Max GPU Length ≤ 340mm Max CPU Cooler Height ≤ 160mm Max PSU Length (Include cable) ≤ 175mm(with HDD) (Include cable) ≤ 365mm(without HDD) Miscellaneous Dust Filter Top/Bottom Net Weight 6 Kgs Gross Weight 7.15 Kgs UPC# 0-761345-10085-4

Antec NX292 Black ATX ARGB Mid-Tower Gaming Chassis Overview: The Antec NX292 E-ATX ARGB Mid-Tower Gaming Chassis effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, plenty of room for expansion, and includes 3 x 120mm fixed mode RGB fans in the front panel and 1 x 120mm fan in the rear. With support for up to a 360 mm liquid cooling radiator in front, the NX292 is easy to build with and easy to cool. The tempered glass side panel allows you to show off all of your gaming hardware inside your case. The unique front mesh design along with the mesh magnetic dust filters help keep temperatures low while free from any dirt or dust. This larger mid-tower chassis supports larger E-ATX motherboards with enough space for all your hardware needs. Features: Great Airflow and Ventilation Tempered Side Glass Panel Unique Front Mesh Design 3x 120mm RGB Front Fans E-ATX Motherboard Support Top and Bottom Magnetic Dust Filters Specifications: Product Code NX292 Form Factor Mid Tower Materials Steel + Plastic Mainboard Support E-ATX, ATX, Micro-ATX, ITX Front Access b'&' Controls Power, Reset, USB 2.0 x2, USB 3.0 x1, Headphone/Mic Combo Jack Side Panel Tempered Glass Drive Bays Expansion Slots: 7, 5.25″: N/A, 3.5″ /2.5″: 2/1, 2.5″: 2 Fan Support Front: 3 x 120mm / 2 X 140mm Top: 2 x 120mm/2 x 140mm Power Supply Shroud 2 x 120mm Rear 1 x 120mm Included Fan(s) 3 x 120mm fixed mode RGB fans in front b'&' 1 x 120mm regular fan in rear Radiator Support Front: 120/140/240/280/360mm Rear: 120mm (Length ≤ 156mm) Clearance Max GPU Length: ≤ 320mm Max CPU Cooler Height: ≤ 155mm Max PSU Length: ≤ 165mm(with HDD), ≤ 300mm(without HDD) Dust Filter Top / Bottom Product Dimensions 40.6 x 20.6 x 45 cm Product Weight 4500g

Corsair iCUE 4000D Black RGB AIRFLOW Mid-Tower Case CORSAIR 4000D RGB Airflow Tempered Glass Mid-Tower, 2x 3.5″, 2x 2.5″ Drive Bays, Front: 3x 120mm / 2x 140mm (3x 120mm AF RGB ELITE PWM Installed), Top: 2x 140 mm / 2x 140mm, Rear: 1x 120mm, 120-360mm Radiator Compatible, 453mm x 230mm x 466mm, GPU – 360mm, PSU – 180mm, Cooler Height – 170mm, I/O: 1x USB3.0, 1x USB3.1 USB type-C, 1x Headphone, 1x Mic, Power, Reset Overview: The CORSAIR 4000D RGB AIRFLOW is a mid-tower ATX case with high-airflow design, three included CORSAIR AF120 RGB ELITE fans providing exceptional cooling for your components. Features: POWERFUL AIRFLOW WITH LOOKS TO MATCH A high-airflow front panel ensures maximum air intake, while three included AF120 RGB ELITE PWM fans with AirGuide technology focus it towards your components at fan speeds up to 2,100 RPM. High-Airflow Front Panel An optimized front panel delivers massive airflow to your system for maximum cooling. OUR BEST PERFORMING RGB FANS CORSAIR AF RGB ELITE PWM fans deliver massive low-noise airflow with AirGuide technology for extreme CPU cooling performance. Anti-vortex vanes ensure more uniform airflow over radiator fins and more optimal heat dissipation. EXTREME COOLING POTENTIAL A spacious interior fits up to 8x 120mm or 4x 140mm cooling fans, along with multiple radiators including a 360mm in front and 280mm in the roof. Dimensions Compact yet efficient, the 4000D RGB AIRFLOW has excellent potential for expansion without being cumbersome. Fan Capacity Fan mounts feature wider cutouts, allowing fan placement customization and flexibility. Radiator Capacity Plenty of room for a roof radiator and fans without contacting your high-end memory modules. CORSAIR RapidRoute Cable Management Quickly and easily route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables, making a clean-looking build easier than ever. Modern Front Panel I/O Puts your connections within easy reach, including a USB 3.2 Gen 2 Type-C Port, 2x USB 3.2 Gen 1 Type-A ports, and a combination audio/microphone jack. vertical gpu mount ready With included vertical PCIe slots and a screw mount for a CORSAIR PCIe extension cable (sold separately), you can show off your GPU and keep it secure at the same time. EASY SLIDE-ON, SLIDE-OFF SIDE PANEL Show off your high-profile components and RGB lighting with an easy slide-on, slide-off attach method. SMART RGB LIGHTING OUT-OF-THE-BOX Fully control and synchronize the RGB lighting for up to six fans with the included iCUE LIGHTING NODE CORE and CORSAIR iCUE software. ACCESSORIZE YOUR CASE From custom front panels to RGB lighting accent tiles, you can personalize your 4000D Series case to reflect your style. Specifications: Product Code CC-9011240-WW Maximum GPU Length (mm) 360 Maximum PSU Length (mm) 220 Maximum CPU Cooler Height (mm) 170 Expansion Slots 7 vertical + 2 horizontal Case Drive Bays (x2) 3.5in (x2) 2.5in Form Factor MID TOWER Case Windowed Tempered Glass Color BLACK Radiator Compatibility 120mm, 140mm, 240mm, 280mm, 360mm Case Front IO (1x) USB 3.2 Gen Type C, (1x) USB 3.2 Gen 1 Type A, (1x) Audio in/out Compatible Corsair Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110i, H115i, H150i Weight 8.1 Height (mm) 466 Length (mm) 453 Width (mm) 230

Antec NX260 Black ATX Chassis Features: Creation of Value b'&' Function The NX260 mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 3 x 120mm ARGB fans in front. With support for up to a 360 mm liquid cooling radiator in front, NX260 is easy to build with and easy to cool. I/O PORTS Power LED Control Button Audio/ Mic USB 2.0 x 2 USB 3.0 x 1 LED Control Button Just a single press to change the front panel’s ARGB lighting effect at will Specifications: Product Code NX260 Case Specification Dimensions 379 x 215 x 448mm (DWH) Form Factor Mid Tower Materials SPCC + Plastic Mainboard Support ATX, Micro-ATX, ITX Front Access b'&' Controls Power, LED Control Button, 1 x USB3.0, 2 x USB2.0, HD-AUDIO Side Panel Tempered Glass Side Panel Expansion b'&' Drive Bays Expansion Slots 7 3.5″ /2.5″ 2/1 2.5″ 2 Fan Support Front 3 x 120mm / 2 x 140mm Top 2 x 120mm Rear 1 x 120mm Power Supply Shroud 2 x 120mm Included Fan(s) 3 x 120mm ARGB fans in front Radiator Support Front 120 / 140 / 240 / 280 / 360mm Rear 120mm Clearance Max GPU Length ≤ 310mm Max CPU Cooler Height ≤ 160mm Max PSU Length ≤ 185mm(with HDD) ≤ 310mm(without HDD) Miscellaneous Dust Filter Top / Bottom Net Weight 4.3 KG Gross Weight 5.2 KG

Antec NX500M mATX RGB Gaming Mini Tower Chassis Features: NX500M Mid-Tower M-ATX Gaming Case NX500M (Pre-installed 1 x 120mm regular fan in rear) NX500M ARGB (Pre-installed 2 x 120mm ARGB fans in front b'&' 1 x 120mm ARGB fan in rear) Unique Design b'&' – Powerful Heat – Dissipation The NX500M features a unique design and excellent cooling performance. The half-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 6 x 120mm fans can be installed simultaneously. Sleek Design with – Massive Air Intake The sleek and elegant exterior design provides ample airflow to your system for maximum cooling while ensuring minimal dust intake. The panel comes equipped with a Type-C port for added convenience in use. Powerful Cooling Supports a 360mm (Length ≤ 397mm) Radiator at the front and a 240mm radiator at the top. Powerful Fan – Compatibility Supports 3 x 120mm fans at the front. High-Airflow – Mesh Front Panel Massive air intake at the front provides ample airflow. Pre-installed – 1 x 120mm fan – I/O Panel Power, Reset, Type-C 3.2 Gen 2 x 1, USB3.0 x 1, USB2.0 x 2, MIC/HD-AUDIO Neat Build – within Reach 20 mm space for cable management ensures your PC build looks neat. Tempered Glass – Side Panel Showcase your personalized hardware and custom water-cooling system. Up to 6 x 120mm Fans Simultaneously – Compatibility – Unlimited Performance Max. GPU Length: 320 mm (Fans are installed at the exterior) Removable HDD – Drive Cage The HDD drive cage is removable to increase PSU installation space. With the drive cage installed, the PSU compartment can accommodate PSUs up to 165mm in length. With the drive cage removed, the PSU compartment can accommodate PSUs up to 325mm in length. Specifications: Product Code NX500M Fan Dimensions 384 x 200 x 451mm (DWH) Form Factor Mini Tower Materials Steel + Plastic Mainboard Support Micro-ATX, ITX Front Access b'&' Controls Power, Reset (NX500M), Type-C 3.2 Gen 2 x 1, USB3.0 x 1, USB2.0 x 2, MIC/HD-AUDIO Power, LED control button (NX500M ARGB), Type-C 3.2 Gen 2 x 1, USB3.0 x 1, USB2.0 x 2, MIC/HD-AUDIO Side Panel Tempered Glass Side Panel Drive Bays Expansion Slots 5 3.5″ /2.5″ 2/3 (with HDD cage) 2/2 (without HDD cage) 2.5″ 2 Fan Front 3 x 120mm / 2 x 140mm Top 2 x 120mm / 2 x 140mm Rear 1 x 120mm Included Fan(s) 1 x 120mm regular fan in rear (NX500M) 2 x 120mm ARGB fans in front b'&' 1 x 120mm ARGB fan in rear (NX500M ARGB) Radiator Support Front 120 / 140 / 240 / 280 / 360 (Length≤397mm)mm Top 120 / 240mm Rear 120mm Clearance Max GPU Length ≤ 300mm(with front fan) ≤ 320mm(without front fan) Max CPU Cooler Height ≤ 155mm Max PSU Length ≤ 165mm(with HDD) ≤ 325mm(without HDD) Miscellaneous Dust Filter Top / Bottom Net Weight 3.7 Kg (NX500M) / 4 Kg (NX500M AGB) Gross Weight 4.45 Kg (NX500M) / 4.7 Kg (NX500M AGB) UPC# 0-761345-81056-2 (NX500M) 0-761345-81057-9 (NX500M ARGB)

The Antec NX290 E-ATX ARGB Mid-Tower Gaming Chassis effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, plenty of room for expansion, and includes 3 x 120mm fixed mode RGB fans in the front panel and 1 x 120mm fan in the rear. With support for up to a 360 mm liquid cooling radiator in front, the NX290 is easy to build with and easy to cool. The tempered glass side panel allows you to show off all of your gaming hardware inside your case. The unique front-vented design along with the mesh magnetic dust filters help keep temperatures low while keeping the chassis free from any dirt or dust. This larger mid-tower chassis supports larger E-ATX motherboards with enough space for all your hardware needs. FEATURES: Great Airflow and Ventilation Tempered Side Glass Panel Unique Front Vented Design 3x 120mm RGB Front Fans E-ATX Motherboard Support Top and Bottom Magnetic Dust Filters SPECIFICATIONS: Form Factor: Mid Tower Materials: Steel + Plastic Mainboard Support: E-ATX, ATX, Micro-ATX, ITX Front Access & Controls: Power, Reset, USB 2.0 x2, USB 3.0 x1, Headphone/Mic Combo Jack Side Panel: Tempered Glass Drive Bays: Expansion Slots: 7, 5.25″: N/A, 3.5″ /2.5″: 2/1, 2.5″: 2 Fan: Front: 3 x 120mm / 2 X 140mm Top: 2 x 120mm/2 x 140mm Power Supply Shroud: 2 x 120mm Rear: 1 x 120mm Included Fan(s): 3 x 120mm fixed mode RGB fans in front & 1 x 120mm regular fan in rear Radiator Support: Front: 120/140/240/280/360mm Rear: 120mm (Length ≤ 156mm) Clearance: Max GPU Length: ≤ 320mm Max CPU Cooler Height: ≤ 155mm Max PSU Length: ≤ 165mm(with HDD), ≤ 300mm(without HDD) Dust Filter: Top / Bottom Product Dimensions: 40.4 x 20.6 x 45 cm Product Weight: 4200g WHAT’S IN THE BOX: Antec NX290 E-ATX ARGB Mid-Tower Gaming Chassis – Black x1

The Antec NX292 E-ATX ARGB Mid-Tower Gaming Chassis effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, plenty of room for expansion, and includes 3 x 120mm fixed mode RGB fans in the front panel and 1 x 120mm fan in the rear. With support for up to a 360 mm liquid cooling radiator in front, the NX292 is easy to build with and easy to cool. The tempered glass side panel allows you to show off all of your gaming hardware inside your case. The unique front mesh design along with the mesh magnetic dust filters help keep temperatures low while free from any dirt or dust. This larger mid-tower chassis supports larger E-ATX motherboards with enough space for all your hardware needs. FEATURES: Great Airflow and Ventilation Tempered Side Glass Panel Unique Front Mesh Design 3x 120mm RGB Front Fans E-ATX Motherboard Support Top and Bottom Magnetic Dust Filters SPECIFICATIONS: Form Factor: Mid Tower Materials: Steel + Plastic Mainboard Support: E-ATX, ATX, Micro-ATX, ITX Front Access & Controls: Power, Reset, USB 2.0 x2, USB 3.0 x1, Headphone/Mic Combo Jack Side Panel: Tempered Glass Drive Bays: Expansion Slots: 7, 5.25″: N/A, 3.5″ /2.5″: 2/1, 2.5″: 2 Fan Support: Front: 3 x 120mm / 2 X 140mm Top: 2 x 120mm/2 x 140mm Power Supply Shroud: 2 x 120mm Rear: 1 x 120mm Included Fan(s): 3 x 120mm fixed mode RGB fans in front & 1 x 120mm regular fan in rear Radiator Support: Front: 120/140/240/280/360mm Rear: 120mm (Length ≤ 156mm) Clearance: Max GPU Length: ≤ 320mm Max CPU Cooler Height: ≤ 155mm Max PSU Length: ≤ 165mm(with HDD), ≤ 300mm(without HDD) Dust Filter: Top / Bottom Product Dimensions: 40.6 x 20.6 x 45 cm Product Weight: 4500g WHAT’S IN THE BOX: Antec NX292 E-ATX ARGB Mid-Tower Gaming Chassis – Black x1

Antec NX290 ATX, Micro-ATX, ITX ARGB Mid-Tower Gaming Chassis – Black Overview: The Antec NX290 E-ATX ARGB Mid-Tower Gaming Chassis effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, plenty of room for expansion, and includes 3 x 120mm fixed mode RGB fans in the front panel and 1 x 120mm fan in the rear. With support for up to a 360 mm liquid cooling radiator in front, the NX290 is easy to build with and easy to cool. The tempered glass side panel allows you to show off all of your gaming hardware inside your case. The unique front-vented design along with the mesh magnetic dust filters help keep temperatures low while keeping the chassis free from any dirt or dust. This larger mid-tower chassis supports larger E-ATX motherboards with enough space for all your hardware needs. Features: Great Airflow and Ventilation Tempered Side Glass Panel Unique Front Vented Design 3x 120mm RGB Front Fans E-ATX Motherboard Support Top and Bottom Magnetic Dust Filters Specifications: Product Code NX290 Form Factor Mid Tower Materials Steel + Plastic Mainboard Support E-ATX, ATX, Micro-ATX, ITX Front Access b'&' Controls Power, Reset, USB 2.0 x2, USB 3.0 x1, Headphone/Mic Combo Jack Side Panel Tempered Glass Drive Bays Expansion Slots: 7, 5.25″: N/A, 3.5″ /2.5″: 2/1, 2.5″: 2 Fan Front: 3 x 120mm / 2 X 140mm Top: 2 x 120mm/2 x 140mm Power Supply Shroud 2 x 120mm Rear 1 x 120mm Included Fan(s) 3 x 120mm fixed mode RGB fans in front b'&' 1 x 120mm regular fan in rear Radiator Support Front: 120/140/240/280/360mm Rear: 120mm (Length ≤ 156mm) Clearance Max GPU Length: ≤ 320mm Max CPU Cooler Height: ≤ 155mm Max PSU Length: ≤ 165mm(with HDD), ≤ 300mm(without HDD) Dust Filter Top / Bottom Product Dimensions 40.4 x 20.6 x 45 cm Product Weight 4200g b'/xc2/xa0'

The Antec AX81 Elite represents the peak of design and cooling excellence for your gaming system. Its eye-catching design is complemented by exceptional cooling performance, making it a true powerhouse. The full-view tempered glass side panel provides an uninterrupted view of your gaming masterpiece, and the ability to attach 8 x 120mm fans at the same time assures ideal airflow. The large-area mesh front panel boosts airflow even further, collaborating with the pre-installed 4 x 120mm ARGB fans to effectively drain heat and maintain appropriate temperatures. With the built-in control hub and ARGB control button, you may create a captivating lighting spectacle that syncs flawlessly with your motherboard, or you can configure ARGB lighting modes. This feature-rich instance allows you to create a setup that is completely unique to you. Your PC build will emanate a clean and ordered appearance with 24mm of cable management space, exhibiting both unique hardware and a custom water-cooling system. Enhance your gaming experience with the Antec AX81 Elite. FEATURES: High-Airflow & Powerful Heat Dissipation Tempered Side Glass Panel Massive Minimalist Mesh Front Panel Pre-installed 4 x 120mm ARGB fans ATX Motherboard Support SPECIFICATIONS: Form Factor: Mid Tower Materials: Steel + Plastic Mainboard Support: E-ATX(≤272mm), ATX, Micro-ATX, ITX Front Access & Controls: Power, Reset, LED Control Button, 2 x USB 2.0, 1 x USB 3.0, Headphone / Mic Combo Jack Side Panel: 4mm Tempered glass Drive Bays: Expansion Slots: 7, 3.5″ /2.5″- 2/1, 2.5″ – 2 Fan: Front: 3 x 120mm / 3 x 140mm Top: 2 x 120mm / 2 x 140mm Power Supply Shroud: 2 x 120mm Rear: 1 x 120mm Included Fan(s): 3 x 120mm ARGB fans in front + 1x 120mm ARGB fan in rear Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm Top: 120 / 140 / 240 / 280mm Rear: 120mm Clearance: Max GPU Length: ≤ 320mm Max CPU Cooler Height: ≤ 160mm Max PSU Length: ≤ 175mm(with HDD), ≤ 365mm(without HDD) Dust Filter: Top / Bottom Product Dimensions: 42.1 x 21 x 48.5 cm Product Weight: 6000g WHAT’S IN THE BOX: Antec AX81 ELITE ATX ARGB Mid-Tower Gaming Chassis – Black x1

The Antec AX90 redefines gaming chassis with its distinctive mesh front panel design and exceptional cooling capabilities. This chassis can handle 11 x 120mm fans at the same time, ensuring ideal airflow for your system while also boasting a diamond-shaped mesh front panel that not only improves cooling efficiency but also works as a powerful shield against dust. The Antec AX90 has spaces that easily accommodate both front and upper radiators up to 360mm in diameter, ushering in new cooling potential. Furthermore, its adaptable design allows for the installation of either a 240mm radiator or two 120mm fans on the side, expanding the cooling options even further. The larger mesh front panel takes centre stage, channelling a torrent of airflow to cool your components precisely. With the built-in control hub, you can embrace the future of customisation, flawlessly synchronising with your motherboard for a harmonic lighting symphony. Alternatively, use the dedicated control button to change the ARGB lighting settings, allowing you to personalise your arrangement to your tastes. FEATURES: High-Airflow and Ventilation Tempered Side Glass Panel Slanted Bar Air Intake Design 4 Pre-Installed 120mm ARGB Fans Powerful Heat Dissipation ATX Motherboard Support SPECIFICATIONS: Form Factor: Mid Tower Materials: Steel+Plastic Mainboard Support: ATX, Micro-ATX, ITX Front Access & Controls: Power,Reset, LED Control Button, 2 x USB 2.0, 1 x USB 3.0, MIC / HD-AUDIO Side Panel: 4 mm Tempered glass Drive Bays: Expansion Slots: 7, 3.5″ /2.5″ – 2 / 1, 2.5″- 2 Fan Support: Front: 3 x 120mm / 2 x 140mm Top: 2 x 120mm Rear: 1 x 120mm Side: 2 x 120mm Power Supply Shroud: 2 x 120mm Rear: 1 x 120mm Included Fan(s): 3 x 120mm ARGB fans in front + 1x 120mm ARGB fan in rear Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm Top: 120 / 140 / 240 / 280 / 360mm Side: 120 / 240mm Rear: 120mm Clearance: Max GPU Length: ≤ 385mm Max CPU Cooler Height: ≤ 160mm Max PSU Length: ≤ 220mm(with HDD), ≤ 410mm(without HDD) Product Dimensions: 47 x 21 x 48 cm Product Weight: 6770g WHAT’S IN THE BOX: Antec AX90 ATX ARGB Mid-Tower Gaming Chassis – Black x1

Antec AX90 ATX RGB Gaming Chassis Overview: The Antec AX90 redefines gaming chassis with its distinctive mesh front panel design and exceptional cooling capabilities. This chassis can handle 11 x 120mm fans at the same time, ensuring ideal airflow for your system while also boasting a diamond-shaped mesh front panel that not only improves cooling efficiency but also works as a powerful shield against dust. The Antec AX90 has spaces that easily accommodate both front and upper radiators up to 360mm in diameter, ushering in new cooling potential. Furthermore, its adaptable design allows for the installation of either a 240mm radiator or two 120mm fans on the side, expanding the cooling options even further. The larger mesh front panel takes centre stage, channelling a torrent of airflow to cool your components precisely. With the built-in control hub, you can embrace the future of customisation, flawlessly synchronising with your motherboard for a harmonic lighting symphony. Alternatively, use the dedicated control button to change the ARGB lighting settings, allowing you to personalise your arrangement to your tastes. Features: High-Airflow and Ventilation Tempered Side Glass Panel Slanted Bar Air Intake Design 4 Pre-Installed 120mm ARGB Fans Powerful Heat Dissipation ATX Motherboard Support Specifications: Product Code AX90 Details Form Factor Mid Tower Materials Steel+Plastic Mainboard Support ATX, Micro-ATX, ITX Front Access b'&' Controls Power, Reset, LED Control Button, 2 x USB 2.0, 1 x USB 3.0, MIC / HD-AUDIO Side Panel 4 mm Tempered glass Drive Bays Expansion Slots: 7, 3.5″ /2.5″ – 2 / 1, 2.5″- 2 Fan Support Front 3 x 120mm / 2 x 140mm Top 2 x 120mm Rear 1 x 120mm Side 2 x 120mm Power Supply Shroud 2 x 120mm Rear 1 x 120mm Included Fan(s) 3 x 120mm ARGB fans in front + 1x 120mm ARGB fan in rear Radiator Support Front 120 / 140 / 240 / 280 / 360mm Top 120 / 140 / 240 / 280 / 360mm Side 120 / 240mm Rear 120mm Clearance Max GPU Length ≤ 385mm Max CPU Cooler Height ≤ 160mm Max PSU Length ≤ 220mm(with HDD), ≤ 410mm(without HDD) Product Dimensions 47 x 21 x 48 cm Product Weight 6770g

Antec Chassis Performance 1 FT ARGB eATX Mid-Tower Gaming Chassis – Black Overview: Antec Chassis Performance 1 FT ARGB ATX – Mid-Tower Gaming Chassis – Black The Antec Performance 1 FT is a cutting-edge PC case that redefines cooling performance and ease. It is made from a sturdy and durable steel material to help protect your components. Its tempered glass side panels on both sides highlight your PCs internals, while the detachable top cooling bracket makes installations of fans and radiators much easier. Prepare for the future with the Antec Performance 1 FT and experience cooling innovation and design excellence. The Performance 1 FT also features Storm T3 PWM Fans which provide powerful airflow for excellent cooling and silence. The Exquisite Steel Mesh front panel enhances GPU cooling, and the wide mesh at the bottom keeps graphics cards cool even under heavy workloads. The built-in Temperature Display allows you to monitor CPU and GPU temperatures in real-time and even toggle between displays or disable the feature as needed. The I/O Panels diverse features include high-speed Type-C transfer, dust protection, and a Mic/Audio 2-in-1 connector. Features: Temperature Display 4mm Tempered Glass Side Panels Pre-Installed Storm T3 PWM Fans Type-C (10Gbps) port for high-speed transfer Exquisite Steel Mesh E-ATX Motherboard Support RTX 40 series Support Powerful Airflow Path for GPU Cooling WHATS IN THE BOX: Antec Performance 1 FT Full Tower Gaming Chassis – Black x1 Specifications: Product Code PERFORMANCE 1 FT Form Factor Full Tower Materials Steel + Plastic + Glass Mainboard Support E-ATX, ATX, Micro-ATX, ITX Front Access b'&' Controls Power, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1 Side Panel 4mm Tempered Glass(Both Sides) Drive Bays Expansion Slots: 8, 5.25″: N/A, 3.5″ /2.5″: 2 / 1, 2.5″: 3 Fan Support Front 3 x 120mm / 3 X 140mm Top 3 x 120mm / 3 x 140mm Power Supply Shroud 3 x 120mm Rear 1 x 120mm Included Fan(s) 3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear Radiator Support Front 120 / 140 / 240 / 280 / 360 / 420mm Top 120 / 140 / 240 / 280 / 360mm Rear 120mm Clearance Max GPU Length ≤ 400mm Max CPU Cooler Height ≤ 175mm Max PSU Length ≤ 175mm(with HDD), ≤ 400mm(without HDD) Dust Filter Front / Top / Bottom Product Dimensions 52 x 23 x 52 cm Product Weight 12550g